Download Print this page
Godo GDPD01T User Manual

Godo GDPD01T User Manual

2.5/3.5`` dual sata hdd docking station

Advertisement

Quick Links

USER MANUAL
GDPD01T
2.5/3.5`` Dual SATA HDD Docking Station

Advertisement

loading

Summary of Contents for Godo GDPD01T

  • Page 1 USER MANUAL GDPD01T 2.5/3.5`` Dual SATA HDD Docking Station...
  • Page 2: Features & Specifications

    It is also designed with a straightforward, uncomplicated USB 3.0 plug-and-play interface. The GDPD01T is compatible with Windows 8/7,Vista, XP, 2000, Mac and Linux operating systems. Please read this manual carefully before using this device. 2.0 FEATURES / SPECIFICATIONS ·...
  • Page 3: System Requirement

    D imensions: 126.5mm(L) x 114.5mm(W) x 83mm(H) · 3.0 SYSTEM REQUIREMENT PC Requirements Minimum Intel Processor Pentium II/50MHz, 64MB RAM · Windows 2000 / XP / VISTA/ 7/8 · · Active USB port MAC Requirements Minimum Apple G processor, 64MB RAM ·...
  • Page 4: Hardware Setup

    5.0 Hardware Setup Device Mode (USB3.0 to SATA External Dual Hard Drive) Install your SATA hard drive properly to the port · connector on the docking station · C onnect the docking station to your computer by USB cable · Connect the power adapter to the enclosure and power up the docking station ·...
  • Page 5 Windows2000/XP/VISTA/7/8, no driver setup is necessary . Please Proceed to step 6.0 to format your drive. Duplication Mode I nstall 2 hard drives into the dock. Make sure to place the · drive with the data you want copied (Source) into the “Source”...
  • Page 6 A cloned drive also takes over the disk ID from the master drive. This causes Windows 7 and Vista to shut down one of the drives if both drives are placed into the HDD docking after cloning. The disk can be switched online again in the windows option “Disk Management”.
  • Page 7 7.0 FAQs: Q: I can't find the drive under my computer, why? A: Please make sure your new hard disk has been partitioned. Q: After plugging the USB port, the drive is not spinning at all, why? A: The USB cable doesn't connect successfully Q: After installing the drive.
  • Page 8 or alcohol. ● The energy consumption When the dock is in standby state, it is still connects with the power,which still keeps consuming electricity.Please cut off the machine and the power, and pull out the power plug from the electric outlet. ●...