Image Colors Are Not Right - Epson EB-G6970WU User Manual

Problem Solving
Check
Is the correct resolution selected?
(Only when projecting computer images)
Is the image direction correct?

Image colors are not right

Check
Do the input signal settings match the signals from the connected
device?
Is the image brightness adjusted correctly?
Are the cables connected correctly?
g
Is the Contrast adjusted correctly?
Is the color adjustment set correctly?
Are the color saturation and tint adjusted correctly?
(Only when projecting images from a video source)
Set the computer so that the signals being output are compatible with the projector.
s "Supported Monitor Displays" p.184
s Computer's documentation
Make the correct settings in Projection from the Configuration menu.
s "Installation Settings" p.26
Change the following settings according to the signal for the connected equipment.
• When the image is from a device connected to the Computer port or the BNC port
s Signal - Input Signal p.109
• When the image is from a device connected to the Video port or the S-Video port
s Signal - Video Signal p.109
Adjust the Brightness setting from the Configuration menu.
s Image - Brightness p.107
Check that all the cables required for projection are securely connected.
Check that no cables are disconnected and that there are no poor contacts in the cables.
s "Connecting Equipment" p.39
Adjust the Contrast setting from the Configuration menu.
s Image - Contrast p.107
Adjust the Gamma, RGB, or RGBCMY setting from the Configuration menu.
s Image - Advanced p.107
s "Adjusting the Image" p.75
Adjust the Color Saturation and Tint settings from the Configuration menu.
s Image - Color Saturation, Tint p.107
Remedy
Remedy
138