Light Button Options - Canon Powershot G15 Manual

LIGht
If you press the LIGHT button on the controller, for about 1 second, the
LEDs will remain continuously on (i.e. whichever ones you have select-
ed – blue or white), rather than flashing. This is useful when you are
trying to surveil for evidence or finding the best angle for your picture.
When using an alternate light source, the angle is extremely impor-
tant and different angles will yield different results. If you press the
LIGHT button again (for about 1 second), it will go back to FLASH mode,
meaning the lights you have selected will flash when you actually take
the picture. NoTE: When you are in continuous on mode (LIGHT), you
will use up your battery much faster than in FLASH mode.
LIGHT
8
FULL RING STAY oN CoNTINUoUSLY
IntensItY
The bars on the left side of the LCD indi-
cate the intensity of the LEDs. one bar
indicates the least intensity, whereas
seven bars means maximum intensity.
By pressing the left and right arrows on
the controller, you can toggle between
the seven different intensities.