The palmscope
compact rugged
video inspection
system (24 pages)
Summary of Contents for General The Seeker DCS050
Page 1
99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.TestEquipmentDepot.com THE SEEKER ™ 050 SERIES USB VIDEO INSPECTION SYSTEMS USER’S MANUAL DCS050/DCS050-09 Please read this manual carefully and thoroughly before using this product.
The Seeker050 Series Systems (DCS050 and DCS050-09) are the newest members of General’s award-winning family of Seeker Video Inspection Systems. The Seeker050 is designed for a wide variety of inspection applications—such as inspecting buildings for mold, leaks or pests; inspecting ducts and pipelines for corrosion or leaks; reading parts and serial numbers of equipment in industrial and manufacturing settings;...
OPERATING INSTRUCTIONS What’s in the package The Seeker050 system (the grip and a 1m (3.28 ft.) long probe) comes fully assembled in a blister pack. The pack also contains ScopeView software on a mini-CD, a set of three probe tip retrieval and inspection accessories (a mirror, a magnet and a pick-up hook) and this user’s manual.
S TUP HARDWARE Before using the Seeker050 or the Seeker050-09, make sure to remove the rubber cap that protects the camera and LEDs on the end of the probe. ACCESSORIES To attach any of the three 12mm accessories that come with the DCS050, slip the semicircular end over the flats of the camera head and rotate the accessory 90°...
Page 6
When you click Connect, the main screen of ScopeView should begin showing a live video feed from your Seeker050. You can now use the thumbwheel on the Seeker050’s grip to adjust the brightness of the probe’s LEDs. ScopeView Operating Instructions Once you have installed ScopeView, you can use the software to view, capture and play back videos and pictures “seen”...
Page 7
To start capturing video, click the icon on the toolbar. When you do so, note that on the right side of the status bar the word “Connected” changes to “Capturing…” and that a stopwatch begins running at its right. To stop capturing video, click the icon again.
SPECIFICATIONS Field of view 60º Minimum focal distance (Seeker050) 4 in. (100mm) Depth of field (Seeker050-09) 0.5 in. to 5 in. (12.7 to 127mm) Connection/power supply Via USB 2.0 or 3.0 computer interface Camera resolution 320 × 240 pixels USB cable length 1m (3.28 ft.) Probe length 1m (3.28 ft.)
Acceptance of the exclusive repair and replacement remedies described herein is a condition of the contract for purchase of this product. In no event shall General be liable for any incidental, special, consequential or punitive damages, or any cost, attorneys’...
Need help?
Do you have a question about the The Seeker DCS050 and is the answer not in the manual?
Questions and answers