Related Manuals for Yeastar Technology MyPBX U510
Summary of Contents for Yeastar Technology MyPBX U510
- Page 1 MyPBX U510 Installation Guide MyPBX U510 Installation Guide Version: V1.1 Yeastar Technology Co., Ltd Date: Aug 9 , 2013 http://www.yeastar.com 1/17...
-
Page 2: Table Of Contents
3.2.3 Connection of FXS ports ..........................12 3.2.4 Power Connection ............................12 3.2.5 Overall Flow Chart ............................12 4. MyPBX U510 Basic Configurations ..........13 4.1 Factory Defaults ..............................13 4.2 Logging in the Web Configuration Panel ......................13 4.3 Network Settings ............................... 15 4.4 Extensions Setup and management ........................ - Page 3 This Guide explains how to install MyPBX U510, how to configure MyPBX U510 via web interface, how to add extensions, and make/receive calls via trunks.
-
Page 4: Preparation Before Installation
Please make sure the following devices are available before installation: Contents of the box Upon receiving MyPBX U510 gift box, please open the package and check if all the items are supplied as MyPBX U510 Packing List (See Sheet 1). If there is any problem, please contact your provider. -
Page 5: Hardware Specifications
MyPBX U510 Installation Guide 2. Hardware Specifications 2.1 Overview Figure 2-1 MyPBX U510 2.2 LED Indicators and Ports Figure 2-2 MyPBX U510 Front Panel Figure 2-3 MyPBX U510 Back Panel http://www.yeastar.com 5/17... - Page 6 For debugging USB port Ethernet ports MyPBX U510 provides two 10/100/1000M adaptive RJ45 Ethernet ports, marked as LAN and WAN. -LAN port: LAN port is for the connection to Local Area Network (LAN). -WAN port: WAN port is the network port for the connection to internet. It supports ‘DHCP server’, ‘PPPoE/dynamic DNS’, and “static IP”...
-
Page 7: Specifications And Operating Environment
MyPBX U510 Installation Guide 2.3 Specifications and Operating Environment Description Size L 438 * W 280 * H 44 (mm) Power Supply 220V, 50~60Hz Operating Temperature 0°C~50°C 32°F~122°F) Storage Temperature -10°C~65°C 14°F~149°F) Operating Humidity 5%~90% Non-condensing) Storage Humidity 0%~95% Non-condensing) Weight 3.4kg... -
Page 8: Mypbx U510 Installation
ADSL modem. LAN Port Connection Connect one end of a network cable to the LAN port of MyPBX U510, and the other end to any port of company’s LAN switch/router. If the LAN port is connected to PC directly (not via a switch), please use cross-over cable. -
Page 9: Connection Of E1/T1/Fxo/Gsm/Umts/Bri Ports
Step 1: Connect MyPBX U510 E1 port to the E1 line according to the line sequence of E1 port. From the above table, we can see that the No.1 and No.2 pins of MyPBX U510 E1 port is for receiving data (No.1 for receiving data -, No.2 for receiving data +), while No.4 and No.5 is for transmitting data... - Page 10 3. Connection of GSM/UMTS ports If No.3 and No.7 connectors are GSM/UMTS Ports, the steps of connection are as below: Step 1: Open the Upper case of MyPBX U510 Step 2: Insert the SIM card as below: Figure 3-4 Inserting the SIM Card http://www.yeastar.com...
- Page 11 MyPBX U510 Installation Guide Step 3: Connect the antenna Once completed, the No.3 and No.7 LED lights would turn red as below figure: Figure 3-5 Connection of GSM/UMTS ports and Status LED 4. Connection of BRI ports The BRI port could be connected to the BRI line and the BRI port of a traditional PBX with a BRI RJ45-RJ11 cable.
-
Page 12: Connection Of Fxs Ports
Once users have made sure that device installation, cable connection and power type is correct, please switch on the power. Then MyPBX U510 will start booting. In the meantime, users would see that the ‘POWER’ and ‘RUN’ indicator lights would turn on. -
Page 13: Mypbx U510 Basic Configurations
MyPBX U510 Installation Guide 4. MyPBX U510 Basic Configurations 4.1 Factory Defaults MyPBX U510 provides web-based configuration interface for administrator and account user. The user can manage the device by log in the web interface. The factory default IP address: LAN: 192.168.5.150;... - Page 14 MyPBX U510 Installation Guide Figure 4-2 MyPBX Admin Configuration Interface Via the configuration interface, the admin can make all the system configurations, including network settings (LAN, WAN, Firewall, VPN, DDNS, VLAN, etc.); system parameters configuration (system prompts, time zone, password, etc.); internal settings (Web access port, user extension range, business hours, conference room, paging and intercom, music on Hold, etc.);...
-
Page 15: Network Settings
MyPBX U510 Installation Guide 4.3 Network Settings After logging in the admin configuration interface, generally the first step is to configure the IP address. If both the WAN and LAN ports are connected to the network, their IP addresses need to be configured. If not, just configuring the IP address of the LAN port which is connected to the local area network of the company is OK. -
Page 16: Making/Receiving Calls
MyPBX U510 Installation Guide 4.6 Making/Receiving calls Note: The MyPBX default settings are sufficient to make phone calls. It is not necessary to make any changes unless the user wants to create new extensions or trunks. Refer to Administrator’s Guide for more. -
Page 17: Conclusion
MyPBX U510 Installation Guide 5. Conclusion This Installation Guide only explains the installation and basic settings of MyPBX U510 for making and receiving calls. For more functionality and advanced settings of MyPBX U510, please refer to the relative documents as below: “MyPBX U510 Datasheet”...