Advertisement
2
INTRODUCTION
Thank you for choosing the Big Mouth amplifier. Please read this manual care-
fully and completely before operating your new amplifier.
1
INPUT
Connect the cable from your instrument's ouput jack to this jack.
Always use an undamaged, shielded instrument cable.
2
VOLUME
Controls the master volume level of the amplifier.
3
OVERDRIVE/CLEAN
Used to control the OVERDRIVE/CLEAN function. In the "out"
position, the input signal is amplified without overdriving.
In the "in" positon, the input signal is overdriven (distorted)
before amplified.
PANEL FUNCTIONS
Advertisement
