Panel Functions - Johnson Rep Tone 30 Instruction Manual

2
INTRODUCTION
Thank you for choosing this Johnson amplifier. Please read this manual
carefully and completely before operating your new amplifier.
1
INPUT
Connect the cable from your instrument's output jack to
this jack. Always use an undamaged, shielded instrument
cable.
2
VOLUME
Used to adjust the input signal level and coordinate with
MASTER control. To decrease the input signal level, the
signal can be amplified without distortion, while increas-
ing the input signal level may create interesting overdriven
effects.
3
OVERDRIVE
Used to adjust the amount of distortion going to the input
signal.
4
MASTER
Controls the volume level of the amplifier.
5
TREBLE BAND
Used to shape the amplifier's tone by adjusting the high-end
frequencies.
6
MIDDLE BAND
Used to shape the amplifier's tone by adjusting the middle
frequencies.

PANEL FUNCTIONS