Turn And Lane Change Signals - GMC Sonoma 2001 Owner's Manual

Turn Signal/Multifunction Lever
The lever on the left side of the steering column
includes the following:
D

Turn and Lane Change Signals

D
-
Headlamp High/Low
D
- -
Flash to Pass
D
Windshield Wipers
D
Windshield Washer
D
Cruise Control (If Equipped)
Beam Changer
Turn and Lane Change Signals
The turn signal has two upward (for right) and
two downward (for left) positions. These positions
allow you to signal a turn or a lane change.
To signal a turn, move the lever all the way up
or down. When the turn is finished, the lever
will return automatically.
To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by
itself when you release it.
As you signal a turn or a lane change, if the arrows don't
flash but just stay on, a signal bulb may be burned out
and other drivers won't see your turn signal.
If a bulb is burned out, replace it to help avoid an
accident. If the arrows don't go on at all when you
signal a turn, check the fuse (see "Fuses and Circuit
Breakers" in the Index) and for burned
An arrow on the instrument
panel cluster will flash in
the direction of the turn or
lane change.
-
out bulbs.
2-39