Parts List - National Railway Supply ERB-C 12/201 Installation, Operation And Service Instructions

17. PARTS LIST

The following is a list of all the parts found in the NATIONAL RAILWAY SUPPLY BATTERY CHARGERS. When
replacing a part, use only original factory replacement parts of the correct size and rating.
DESCRIPTION
TRANSFORMER ASSEMBLY
SCR ASSEMBLY
SHUNT ASSEMBLY
SHUNT INSULATOR
AC INPUT JUMPERS
CONTROL MODULE
BEZEL ASSEMBLY
TEMP TRANSDUCER, 10' (BOX W/ ADHESIVE)
TEMP TRANSDUCER, 30' (BOX W/ ADHESIVE)
TEMP TRANSDUCER, 10' (W/ TERMINAL)
TEMP TRANSDUCER, 30' (W/ TERMINAL)
CONTROL CABLE, J1
CONTROL CABLE, J2
PRINTER CABLE ASSEMBLY
OUTPUT CAP
BASE ASSEMBLY
COVER ASSEMBLY
DIODE ASSEMBLY, D
TERMINAL TAP STRIP
FUSEHOLDER, ASSEMBLY
VARISTOR ASSEMBLY W/ CAP., VR1
FUSE
TAP STRIP ASSEMBLY W/ I/O STUDS
CIRCUIT BREAKER ASSEMBLY
VARISTOR ASSEMBLY, VR2
BUSHINGS, 1" DIA (12)
The adhesive used on the temperature probes (#14123S and #14126S) is 3M Scotch #Y-9473 which is a
thermally conducting two-sided adhesive tape. If a replacement adhesive is needed, use this type of tape or an
equivalent adhesive.
www.nationalrailwaysupply.com
ERB-C MODELS
12/201
12275S
15909S
10734S
14136S
14241S
16740S
14992S
14123S
14126S
29741S
29742S
14103S
14549S
14161S
14417S
21276S
14203S
14786S
14484S
03837S
12717S
15834S
14789S
14092S
14759S
14197S
11
12/501 24/301
14305S 14330S
17181S 17011S
10734S 10734S
14136S 14136S
14241S 14241S
16750S 16755S
14992S 14992S
14123S 14123S
14126S 14126S
29741S 29741S
29742S 29742S
15326S 15326S
15038S 15038S
14161S 14161S
15032S 15032S
21277S 21287S
15034S 15034S
14786S 14786S
14484S 14484S
03837S 03837S
12717S 12717S
15029S 15029S
14789S 14789S
17243S 15037S
14759S 14759S
14197S 14197S
01434J