No measurements registering
The speed value won't increase from '0'
The numbers displayed are incorrect
Slow Reaction
Blank Screen
Dark display
No drawing on screen
Do not expose this device to extreme moisture or sunlight. Doing so will affect normal
•
operation and, in some extreme cases, endanger the user.
Do not disassemble the product.
•
Any misuse of the product will void warranty. In the event of product misuse, Kogan will
•
not be responsible for damage or injury if applicable.
If you believe the computer has malfunctioned or requires repair, please refrain from
•
attempting to repair it yourself. Refer all servicing matters to qualified personnel, or
contact the Kogan Customer Support Team.
Incorrect positioning of the magnet and/or sensor. The magnet must
pass within ~1mm of the sensor. The sensor must also be within 50cm
of the computer.
Incorrect location the installation of Magnet and Sensor.
Incorrect parameters in setup, eg. the perimeter of the bicycle wheel
The computer is working in temperatures below zero degrees.
The display has been exposed to extreme sunlight. Attempt to use the
computer in shady environments.
The battery has not been installed properly or, alternatively, the battery
has been drained. Please reinstall or replace the battery.
Remove and replace the battery.
4