Table of Contents
Advertisement
Date/Time/Driver ID Stamp
Use this setting to add a date, time and driver ID stamp to all recordings and photographs.
Enter the menu and use the 'Up' or 'Down' buttons to highlight 'Stamp'. Select it by pressing the 'OK' button and use the 'Up', 'Down'
and 'OK' buttons to highlight and select the information you would like to 'stamp' on each recording or photograph. Press button #1,
the 'Menu/return button, to exit the 'Stamp' feature and return to the menu.
To exit the menu, press the Menu/Return button, button #1.
User tip: If you want to 'stamp' a 'Driver ID' you will have to first add one to your DX20. Find instructions on how to set the 'Driver ID' further on,
in this User Guide.
G-Sensor
Your DX20 has a built-in G-Sensor which continually monitors for impact or sudden changes in direction or speed, so it can sense whether
you vehicle has been involved in an incident or accident. If the G-Sensor senses one of these things, your DX20 will automatically lock and
save the preceding length of video recorded so that you will have a permanent record of the event.
Your unit comes with the G-Sensor set to Medium sensitivity, which we think is the optimum setting but you can change this if required.
To change the G-Sensor sensitivity, enter the additional settings menu by pressing the menu button twice, and use the 'Up' and 'Down'
buttons to highlight 'G-Sensor'. Select it by pressing the 'OK' button and use the 'Up' and 'Down' button to choose between Off, High,
Medium or Low. Press the 'OK' button to save your selection and return to the menu.
To exit the menu, press the Menu/Return button, button #1.
WB (White balance)
You can adjust the White balance to improve the quality of the video or photograph.
Enter the menu and use the 'Up' or 'Down' buttons to highlight 'WB'. Select it by pressing the 'OK' button and use the 'Up' and 'Down'
buttons to choose between Auto、Incandescent、Sunny、Cloudy and Fluorescent. Press the 'OK' button to make your selection and
return to the menu.
To exit the menu, press the Menu/Return button, button #1.
11.
Advertisement
Table of Contents
