What's In The Box - Schiit MJOLNIR 2 Owner's Manual

WELCOME
Mjolnir is Thor's hammer. The ultimate weapon to crush
your enemies. Or something like that. We're from the
USA, so we may not be up on all the Norse mythology,
unless we saw it in a movie or something.
But back to Mjolnir 2. Don't use Mjolnir 2 to crush your
enemies, use it to take control of the hardest-to-drive
headphones on the planet, or to add new life to ultra-
sensitive cans. Because Mjolnir 2 is flexible. Balanced
out? Sure. Single-ended out? Sure. Gain switchable?
Sure. We even put an input select on. Woo-wee!
And, Mjolnir 2 is the only amp that lets you run tube
hybrid or all solid-state, thanks to the new Schiit LISST
(linear, integral solid state tubes).
Bottom line: this is a serious end-game amp, not just
two of the same amps in a chassis, or a single-ended
amp with balanced connectors, or a balanced-to-single-
ended-to-balanced converting amp with tons of extra
circuitry. Enjoy your time with Mjolnir 2.
IMPORTANT
Mjolnir 2 is an inherently balanced amplifier.
Do NOT use any balanced-to-single-ended
converters on the balanced headphone OR
preamp outputs. That's what the single-
ended summed outputs are for.
So what happens if you use balanced-to-SE converters? It'll trip the
protection circuits on the amp. Or sound like crap. Or both. Bottom
line, use the balanced outputs for balanced stuff, and single-ended
outputs for single-ended stuff, and everything will be fun and happy.

WHAT'S IN THE BOX

Mjolnir 2
ONE
Power cord (for, like, well duh)
ONE
Stick-on feet (because the amp already has screw-in
ZERO
feet—you've reached the big leagues now, guys)
Crystals, cryo-nano-dampers, alien wave absorbers,
ZERO
or any other magical parts