Introduction; The Benefits - Asante 8001/P/W User Manual

2. Introduction

The NetCam 8001 PT Network Camera is a combined Network Camera and Pan/Tilt device. It
plugs directly into an Ethernet network and delivers clear and sharp surveillance video/images to
any Internet browser via Ethernet or IP network. The NetCam 8001 includes its own, built-in Web
server that enhances traditional surveillance systems by distributing monitored images over a
secure intranet network. The unit's Pan/Tilt/Zoom functions are controlled directly from the
browser window, as are all of the other available configuration options. All that is required is a
Microsoft Internet Explorer.
The NetCam 8001 is a family of Network Camera:
1. NetCam 8001 Network Camera – Connecting directly to Ethernet or Fast Ethernet
networks,
2. NetCam 8001P, a Power over Ethernet (PoE) Network Camera - is designed for
Non-stop power security support environment using Ethernet supply power.
3. NetCam 8001W, a Wireless, 802.11b/g Network Camers – Is designed for Wireless LAN
operation.
The Web-based interface in both models features several user-friendly Wizards that simplify the
installation process and provide for a seamless integration into your networking environment and
custom applications. The open-network structure minimizes the need for costly coax cabling, to
offer remote imaging over the network for a minimal connection overhead.
The NetCam 8001 family is smart and cost-effective solution for meeting the sophisticated
demands expected of a modern interactive surveillance and remote monitoring system. It is
simple to install - and easy to use. Please see the technical specifications on page 37 for full
details.

The Benefits

True Plug-n-Play
Real-Time -
Ease Access -
©2007 Asante Networks Inc., All rights reserved. NetCam are registered trademarks of Asante Network, Inc.
All other names may be trademarks or registered trademarks of their respective owners. Specifications subject to change without prior notice.
ll you need do before using the product is connect it to your
- A
network and assign it a valid IP address by either using dynamic IP
address (
Dynamic Host Configuration Protocol
address. The only software needed for viewing images or
configuring the product is Microsoft Internet Explorer 4.x (will
automatic download ActiveX component)
The on-board real time video processor and experienced subsystem
integration technologies, it provides up to 30 frames per second of
real time quality video images over 10Mbps or 100Mbps networks.
Adopt TCP/IP networking, SMTP e-mail, HTTP and other standard
Internet-related protocols, the NetCam 8001 can be accessed by
ubiquitous IE browser at any place and any time. You may manage
the NetCam 8001 directly from its own Web pages and upgrade any
new release firmware over network.
)
DHCP or static IP
8