Step
Enter the Main Page
1
Open A Microsoft Internet Exploer(IE) Window
Enter Camera IP address
2
Enter Login Window
Enter Username: "root", Password: "root"
Step
Install Internet Explorer Plug-In Components
1
Install ActiveX
When the username and password are confirmed, a
control setup screen pops up under the IE address
bar. Click "Install ActiveX Control" to install the
controls.
2
The security warning screen aps.
Click Install.
The ActiveX is powered by Uniform Technologies and
You need to press Install to enable media viewer on
your IE browser ActiveX plug-in.
3
Enter Home Camera Page
You Will Enter Home Page After Login
3
3
Network Camera Live & Control Page
When ActiveX Plug-In is installed then you can view
video image. If you can not see, please select
streaming mode to HTTP.
If No Video Image
.
You may need to check your PC environment including
(1) Window Firewall setting
(2) IE version should be 6.0 or above.
You may need to check router/firewall setting if you
view the video from the other side of router/firewall.
You may refer to user manual to learn this in depth.
Please refer to User Manual for detail operation.
.
NetCam 8001/P/W
Quick Guide
©2007 Asante Networks Inc., All rights reserved. NetCam is a registered trademarks of Asante Network, Inc.
SecureNET
www.asante.com