Download Print this page

Motion Detection - Asante 8001/P/W User Manual

Asante user's manual network camera 8001/p/w

Hide thumbs Also See for 8001/P/W:

Table of Contents

Motion Detection

You can open the setting frame by clicking on the area to monitor. To set the area to monitor,

you can adjust the size of the frame by dragging the pointer to the frame edge and adjust

after you move the mouse to the desire location.

There are 3 frames available for setting. You may adjust the sensitivity of the area by

entering the degree of sensitivity in the "Sensitive" field. "1" is the least sensitive, and

the "100" is extremely sensitive.

Note 1 – 100 level of sensitivity may conduct too many false alarm due to ay light

change will cause the alarm. This is not highly recommended for detect any moving

object. Default is 60.

Note 2 – If you would like to set 3 areas separately and treat it as independent event.

You can create 3 different events accordingly.

Select Save to complete and activate your settings.

All other names may be trademarks or registered trademarks of their respective owners. Specifications subject to change without prior notice.

Table of Contents

Do you have a question about the 8001/P/W and is the answer not in the manual?

Save PDF