Notice; Date/Time (Date/Time Setting) - Asante 8001/P/W User Manual

Date/Time (date/time setting)

Server Time: Display the video device time.
PC Time: Display the local PC or Laptop time.
To synchronize the time, you may
1. Synchronize the time with PC's time:
The preset method of time synchronization of the camera time with your PC time.
2. Get Time from an NTP server: synchronize the time with the NTP (Network Time
Protocol)
Click on the "NTP" Button
Enter the NTP server's IP address.
Press "SAVE" to activate it.
The camera will update its time once obtaining the NTP time.
Note: The default NTP servers are:
A. NTP Server 1: 198.123.30.132
B. NTP Server 2: 192.43.244.18
C. NTP Server 3: 133.100.9.2
3. Change the time manually:
Click the "User Input".
Select the format of date display, i.e. "yyyy/mm/dd" format.
Select the format of date display, "hh:mm:ss" by 24 hours format.
Select the time zone.
Select "Adjust" to adjust time.
©2007 Asante Networks Inc., All rights reserved. NetCam are registered trademarks of Asante Network, Inc.
All other names may be trademarks or registered trademarks of their respective owners. Specifications subject to change without prior notice.
Date/Time setting
54