You should see the following Connection message. You may be prompted to press
4.
the OK button on the front of the reader to accept the connection request. If the
the connection fails, repeat the process a couple of times
If you the connection continues to fail, then open Task Manager and select
5.
Services. Look for the baiMobile3000MPMonitor. If the service is stopped (as
shown), select the Services box in the lower right hand corner.
If you the connection attempt continues to fail, then open Task Manager and
6.
select Services. Look for the baiMobile3000MPMonitor. If the service is
stopped (as shown), select the Services box in the lower right hand corner.
Right click on baiMobile3000MPMonitor, and select Start and Automatic (see
below).
24
.