Problem
The mixer vibrates
The attachment hits the
bottom of the bowl
Cleaning and Care
Possible cause
The mixer is not resting on a stable
surface.
The anti-slip rubber feet are worn.
The speed used is too high or the
load is excessive.
The bowl has not been correctly
locked into its base.
The lower attachment shaft has
come loose over time.
The attachment is not correctly
locked into position.
Solution
Place the mixer on a flat,
stable surface.
Have them replaced at an
Authorized Service Center.
Set a lower speed and
ensure the bowl has not
been overfilled.
Check that the bowl is
correctly locked into its
base.
Have the mixer checked
and adjusted at an
Authorized Service Center.
Move the speed selector to
0, press the button on the
rear of the appliance to
raise the head and check
that the attachment is
correctly locked into
position on the lower
attachment shaft.
25