Battery Installation
Before installing the battery, make sure the following are installed:
•
Touch Control Board (if not, perform
•
Mainboard (if not, perform
Perform steps 1 and 2 of the
1.
Align and place the battery on the bezel.
2.
Secure the screw to the battery and the bezel.
3.
5-48
Touch Control Board Installation
Mainboard Installation
Function Board Installation
Figure 3:77. Installing the Battery
Figure 3:78. Securing the Battery Screw
on page 3-54).
on page 3-64).
on page 3-33.
Service and Maintenance