Restart The Computer - Panasonic CF-195RAAXBE Operating Instructions Manual

Cf-19 series
Table of Contents

Advertisement

First-time Operation
NOTE
l PC Information Viewer
This computer periodically records the management information of the hard disk, etc. The maximum data volume
for each record is 1024 bytes.
This information is only used for estimating the cause when the hard disk goes down by any possibility. They are
never sent to outside via network nor used for any other purpose except for the purpose described the above.
To disable the function, add the check mark for [Disable the automatic save function for management information
history] in [Hard Disk Status] of PC Information Viewer, and click [OK].
Reference Manual "Checking the Computer's Usage Status")
<For MUI OS model>
l
In the default settings, a shortcut icon for Korean language is on the Desktop screen. You may delete the icon if not
necessary.
„ Before using wireless function
A Slide the wireless switch to ON.
B Display "Charm" and click
Set [Airplane mode] to [Off], and then;
set [Wi-Fi] to [On] (for wireless LAN).
set [Mobile broadband] to [On] (for wireless WAN).
set [GPS] to [On] (for wireless WAN).
set [Bluetooth] to [On] (for Bluetooth).
<For MUI OS model>To select language
To select a language other than the one you have selected during the first-time operation, follow the steps below.
A Open the Control Panel.
1. Right-click any empty location on the Start screen.
2. Click [All apps] on the app bar.
3. Click [Control Panel] under "Windows System".
B Click [Clock, Language, and Region] - [Language] - [Add a language].
18
8
Set the time zone, and then set the date and time.
A Open the Control Panel.
1. Long touch any empty location on the Start screen.
2. Click [All apps] on the app bar.
3. Click [Control Panel] under "Windows System".
B Click [Clock, Language, and Region] - [Date and Time].
C Click [Change time zone...].
D Select the time zone, then click [OK].
E Click [Change date and time...], then set the date and time.
9

Restart the computer.

A Display "Charm" and click
B Click [Power] - [Restart].
A Click
(Start) -
10 Create the recovery disc.
If the recovery partition of the hard disk is damaged or have some problems,
you can use a recovery disc to install the OS and restore its factory default con-
dition.
We recommend creating a recovery disc before you begin using the computer.
Refer to è
Reference Manual "Recovery Disc Creation Utility" about creat-
ing the disc.
- [Change PC Settings] - [Wireless].
.
- [Restart].

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cf-195gaaxbe

Table of Contents