Table of Contents
Advertisement
6
<For MUI OS model>
Select language.
Select language and OS (32-bit or 64-bit).
CAUTION
l
Carefully choose your language because you cannot change it later. If you set a
wrong language, you need to reinstall Windows.
A Select language on "Your display language" and click [Next].
Follow the on-screen instructions.
A Select language and OS (32bit or 64bit) on "Select OS" screen and click [OK].
The language setting will start by clicking [OK] on the confirmation screen.
The language and OS setting will be completed in about 15 minutes.
B When termination screen is displayed, click [OK] to turn off the computer.
C Turn on the computer.
7
Setup Windows.
Follow the on-screen instructions.
l The computer restarts several times. Do not touch the keyboard or touch
pad, and wait until the drive indicator
l After the computer is turned on, the screen remains black or unchanged for
a while, but this is not a malfunction. Wait for a moment until the Windows
setup screen appears.
l During setup of Windows, use the touch pad and clicking to move the cursor
and to click an item.
l Setup of Windows will take approximately
20 minutes. Go to the next step, confirming each message on the display.
l You can set the Wireless Network after the setup of Windows is complete.
If "Choose a network" is displayed, you can select "Connect to a
wireless network later".
"Join a wireless network" screen may not appear.
CAUTION
l You can change the user name, password, image and security setting after
setup of Windows.
l Remember your password. If you forget the password, you cannot use Win-
dows. Creating a password reset disk beforehand is recommended.
l Do not use the following words for user name: CON, PRN, AUX, CLOCK$, NUL,
COM1 to COM9, LPT1 to LPT9, @. In particular, if you create a user name (ac-
count name) that includes the "@" mark, a password will be requested at the
log-on screen, even if no password has been set. If you try to log on without en-
tering a password, "The user name or password is incorrect." may be displayed
and you will not be able to
(è page 30).
l Use standard characters as a computer name: numbers 0 through 9, uppercase
and lowercase letters from A to Z, and the hyphen (-) character.
If the error message "The computer name is not valid" appears, check if charac-
ters other than the above are not entered. If the error message still remains on
the display, set the key entry mode to English ("EN") and enter characters.
<For MUI OS model>
l When setting up the keyboard, choose the appropriate one to your computer.
Otherwise, input by the keyboard may become unavailable.
has turned off.
5 minutes /
sing in /
log on to Windows
17
Advertisement
Table of Contents
