Accessing Reset Buttons - Worcester 
 User Instructions

FAULT CONDITIONS:

ACCESSING RESET BUTTONS:

(remove upper front panel)
(remove upper front panel)
If the above checks prove satisfactory and the boiler
(remove top panel,
remains off, then a safety device in the boiler control
located on the top of the burner control box)
system may have been activated to prevent the
boiler from operating:
Automatic reset:
Do not attempt to repeatedly start the boiler
using the manual reset buttons as persistent
failure indicates a fault requiring the attention
of a service engineer.
Boiler overheat (manual reset):
Flue overheat (manual reset):
Burner lockout (manual reset):
10