Advertisement
Quick Links
Intelix DIGI-VGASD-R
Installation Manual
Introduction
The Intelix DIGI-VGASD-R active receiver balun transmits VGA video,
stereo audio, and IR or RS232 up to 350 feet over a single twisted pair cable.
The unit features dual amplified outputs and adjustable video equalization.
When used with a compatible Intelix send balun, the DIGI-VGASD-R
provides 1600 x 1200 video performance and 20 Hz to 20 kHz, hi-fidelity
audio performance.
The unit requires power and includes a 5V power supply.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Intelix DIGI-VGASD-R
Summary of Contents for Intelix DIGI-VGASD-R
- Page 1 IR or RS232 up to 350 feet over a single twisted pair cable. The unit features dual amplified outputs and adjustable video equalization. When used with a compatible Intelix send balun, the DIGI-VGASD-R provides 1600 x 1200 video performance and 20 Hz to 20 kHz, hi-fidelity audio performance.
-
Page 2: Installation
If both signals are connected, IR will take precedence over RS232. 4. Connect the DIGI-VGASD-R receive balun to the VGA input of the video destination, the audio input of the audio destination, and an IR or RS232 control destination. If required, connect a second video destination. Do not connect the 5V power supply. - Page 3 7. Connect the 5V power supply to the DIGI-VGASD-R receive balun. 8. Power-on the connecting audio, video, and control equipment. 9. Verify picture quality. If necessary, adjust the signal using the blue, green, and red dials on the DIGI-VGASD-R receive balun.
- Page 4 Example System...
-
Page 6: Troubleshooting
Troubleshooting Symptom Causes Possible Solutions No signal No continuity in Verify cable continuity between pairs of video link baluns. Verify the max distance has not been exceeded. Verify the audio, video, and control cables between the equipment and hardware are connected and pass signal. No signal Power off Check power supplies of video... -
Page 7: Technical Specifications
One (1) 5VDC power supply Ordering Information DIGI-VGASD-R *Distances, picture and audio quality may be affected by cable grade, cable quality, source and destination equipment, RF and electrical interference, and cable patches. Intelix specifications are based on straight-through cabling with standard-grade Cat 5. - Page 8 Intelix LLC 2222 Pleasant View Road Phone: 608-831-0880 Middleton, WI 53562 Toll-Free: 866-4-MATMIX www.intelix.com intelix@intelix.com...
Need help?
Do you have a question about the DIGI-VGASD-R and is the answer not in the manual?
Questions and answers