National Instruments QuickSyn Lite Quick Start Manual

QuickSyn Lite QuickStart Guide
This document provides information about hardware and software
installation for the QuickSyn Lite Synthesizer.
QuickSyn Lite Synthesizers
QuickSyn Lite Synthesizers employ the same revolutionary
phase-refi ning QuickSyn technology as the full-featured
QuickSyn Synthesizers, enabling wide coverage (0.65 to 10 or
20 GHz), fi ne resolution (1 Hz resolution), fast frequency
switching (100 μs), and instrument-grade spectral purity.
This document will guide you through the simple process of
setting up your QuickSyn Lite Synthesizer. A complete user
manual is available online (ni-microwavecomponents.com)
along with device drivers and software.
Check kit contents
Identify contents of box:
Letter Description
A QuickSyn Lite Synthesizer
B CABLE,USB
C CABLE,DC BIAS
Install drivers and software
Download device drivers and Soft Front Panel from ni-microwavecomponents.com and refer to the QuickSyn user manual for instructions on
how to install the drivers and software. Note the user manual is available online.
© 2014 National Instruments
NOTE:
We recently changed the branding of the QuickSyn product
line by replacing the Phase Matrix logo with the National
Instruments logo. In some cases, as we deplete our stock, you
may observe the Phase Matrix logo on packaging, software,
manuals, and the unit itself.
Order Number
FSL-0010 or FSL-0020
MFSW-ACC02
2048118-00
(This cable is for functional test purposes only)
Document No. 5520035-00 | Rev. B | ECN 001540
Qty
1
1
1