Rear Panel - Sony TA-A1ES Operating Instructions Manual

Rear panel

8
GB
Parts

SPEAKER (RIGHT) terminals

SPEAKER IMPEDANCE switch
(4 Ω/8 Ω)

IR REMOTE jack

AUTO STANDBY switch (ON/
OFF)

SPEAKER (LEFT) terminals

AC IN terminal

UNBALANCED LINE 1/2/3/4
L/R jacks

BALANCED LINE 5 L/R jacks
Functions
Connect a right speaker (page 10).
Set the switch to the impedance of the
speaker connected (page 10).
Connects an IR repeater (not supplied)
(page 13).
When it is set to ON, the amplifier
switches to standby mode
automatically when no sound has been
output for about 10 to 15 minutes
(page 17).
Connect a left speaker (page 10).
Connects the supplied AC power cord
(mains lead) (page 14).
Connect analog audio equipment with
audio cables (page 12).
Connect analog audio equipment with
XLR (balanced) cables (page 12).