Table of Contents
Advertisement
DVR6200T_6400T_EN.book Page 25 Jeudi, 18. octobre 2007 11:17 11
To stop a recording, return to the channel being recorded, and press the
By pressing several times the
30-minute steps with a maximum duration of 4 hours (depending on software
version). You can then switch off the receiver: the recording will stop
automatically at the end of the programmed time.
When you record in deferred mode, the receiver can add a few seconds of
video at the beginning of the recording.
Once a recording is launched, you can no longer rewind before the start time
of the recording.
10-2 RECORDING PROGRAMMES USING THE MENU
The Recording timers menu enables you to programme your recordings manually, with the options and
the frequency of your choice.
Press the
key to access the main menu. Select RECORDING TIMERS then press
Select a blank line by using the
A screen is displayed in which you can
programme your recordings.
-
Enter the channel number which you wish to
record.
-
Select the frequency of recording:
-
SINGLE: only once at the scheduled time.
-
WEEKLY: once a week at the scheduled
time.
-
DAILY (MON-FRI): at the scheduled time,
every day from Monday to Friday and
every week.
-
DAILY (MON-SAT): at the scheduled
time, every day from Monday to Saturday and every week.
-
DAILY (MON-SUN): at the scheduled time, every day and every week.
-
Enter the recording start date.
-
Enter the time to start and end the recording.
-
If you wish to limit the access to this recording, activate locking (see "Recording list", page 27).
Confirm the programming by pressing
To modify a recording, return to the recording timers menu. Make the modifications desired to the
recording parameters and confirm the programming.
key, you can select a recording time in
or
keys then press
.
- 25 -
key.
.
.
Advertisement
Table of Contents
