Advertisement
Filter Maintenance
The filter cartridges in the Living Water require periodic replacement for peak
performance.
CAUTION: Use only replacement filters provided by your Living Water distributor.
Contact your EcoQuest Business Owner for replacement filters.
The pre-filter (Living Water III only - see page 1) should be replaced when it appears
dirty and/or the normal flow of water through the system has decreased.
The post-filter should be replaced when one or more
of the following occur:
• The filter has been in service for one year.
• The filter has processed more than 1000 gallons of
water.
• The system has not been activated for more than
two weeks.
• There is a noticeable decrease in water flow.
Changing the Filters
CAUTION: Unplug the system to prevent electrical
shock and potential exposure to UV light.
1. Remove the filter chamber cap (see page 3).
2. Remove the filter (B) and discard.
3. Install the new filter (B).
4. Replace the top cap (A) making sure the blue
o-ring (C) is seated properly in the chamber
when the cap is tightened.
A
C
B
Advertisement
