DFRobot OverLord 3D User Manual page 28

Attention: If there is an unfinished print task, OverLord will remind you if you want to
continue that task. Choose "Yes" to continue and "No" to give up and then enter print file
chosen menu.
OverLord 3D Printer User Manual
(3) Select "Print" in the
control panel to enter print file
chosen menu.
Press"↑"or"↓"to select, press
"OK" to enter or confirm.
Yes：Continue last unfinished task.
No：Start new print
(3) Select the print file.
(4) Press "OK",
OverLord starts printing.
28