Display Setup - Kenwood DNN9150DAB Instruction Manual

Return to the Top page
Setting Up

Display Setup

1
Touch [ ] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Display].
Display screen appears.
See the following section for each setting.
• Control monitor angle
• Adjust panel color (P.121)
120
(P.120)
Ñ
Monitor angle control
You can adjust the angle of the monitor.
1
Touch [Angle] in the Display Menu
screen.
Angle setup screen appears.
2
Select a number below an angle that
will best suit your monitor viewing.
Default is "0".
NOTE
• You can store the current monitor angle as the
angle during power off. Touch [Memory] when
the desired angle is selected.
• The front panel can be set to open automatically
when the ignition is turned off, so that it can be
detached for antitheft purpose. Touch [ON] of
[Auto Open].