Kenwood DNN9150DAB Instruction Manual page 136

Ñ
Position DTA Control
You can fine-adjust your listening position.
1
In Position screen, touch [Adjust].
2
Select the speaker you wish to adjust
by touching speaker icon.
3
Set DTA as follows.
[C], [D]
Adjust the settings of the DTA position.
Gain
Touch to adjust the gain of each speaker.
Initialize
Initializes the setting values.
Return to the Top page
NOTE
• Make fine adjustment of the delay time of the
speaker output specified here to have a more
suitable environment for your vehicle.
• If you specify the distance from the center of the
currently set listening position to every speaker,
the delay time will be automatically computed
and set.
1 Determine the center of the currently set
listening position as the reference point.
2 Measure the distances from the reference point
to the speakers.
3 Calculate the differences between the distance
of the furthest speaker and other speakers.
4 Input the differences calculated in step 3 for
individual speakers.
5 Adjust gain for individual speakers. A sound
image will be shifted to the speaker with
increased gain.
Example: When [Front All] is selected as the
listening position
150cm
Controlling Audio
+100cm
50cm
80cm
+70cm
+0cm
135