Rear Panel - Inter-m PV-6232 Operation Manual

MULTI VOICE FILE

Rear Panel

Rear Panel
1
1. AC CONNECTOR AND FUSE HOLDER
Connect the supplied standard AC input cable to this input. The fuse holder below the input contains the AC
overload protection fuse. If the fuse has blown out, replace it with a fuse of the same type and rating. If the
fuse continues to blow, refer servicing to a qualified service technician.
2. DC INPUT TERMINALS
This is a DC +24V power input terminal to operate this unit by connecting with DC power. Make sure to
check voltage and (+), (-) polarity before connection.
3. SERIAL PORT (to PW-6242A)
This is a terminal to connect with our product PW-6242A and can control this unit according to schedule
memorized in PW-6242A.
The maximum cable length of RS-232C is 15m (50 feet).
4. CD INPUT JACK
This input accepts a CD player (or other unbalanced line-level source) for the purpose of recording (storing)
an audio signal.
5. AUX INPUT JACK
This input accepts a cassette deck (or other unbalanced line-level source) for the purpose of recording
(storing) an audio signal.
6. OUTPUT (BALANCED)
This output connects to a paging system (or sound system) that will broadcast the selected audio program signal(s).
6
PV-6232
2 3
4 5 6