Inter-m PV-6232 Operation Manual page 11

MULTI VOICE FILE
2) You can upload, download or delete MP3 files by double-clicking a movable disc.
NOTE : 1) If OS is based on WINDOWS 98, you must install a separate USB driver.
For the relevant USB driver and installation manual, you can download them from our homepage
(www.inter-m.com).
4 folders are automatically created in the "INTER-M" folder of the inner memory when
recording, and this folder is the part used by operation program. To use a folder in this
product, do not use a "INTER-M" folder not create a separate and different folder to use.
To remove the cable connected to a PC and this unit, first stop a "Large capacity USB storage"
using "SAFELY REMOVE HARDWARE" program from a PC, and remove the cable after
checking message for safely removing hardware. If failing to use such procedure, working data
and product may be damaged.
6. AUTO PLAY
When AC or DC power is supplied, the EMORG.mp3 file in the IMSND folder is played automatically.
1) Press the REPEAT button long (3 sec), you can see the setting in the display.
2) Press SKIP UP and it is turned on and Press SKIP DOWN and it is turned off.
3) After select ON or OFF, press ENTER then the setting is saved. (Initial setting is OFF)
4) If the Setting is ON, then you can see AUTO on upper of the display.
5) After connecting USB port to PC, save the file (MP3) which you want to auto-play in the IMSND folder with
named "EMORG.mp3".
7. BAUD RATE SETTING
Correct Baud Rate should be set to connect PW-642/9642/6242a or PW-9242N/ER-6116.
If the setting is not correct, you can't control SCHEDULE.
1) Press STOP button long, you can see the current Baud Rate on the display.
2) Select the Baud Rate as below to match the model with
MODEL
PW-642/9642/6242A
PW-9242N/ER-6116
Initial setting is 19200bps.
3) After selection, press ENTER, then the setting is saved. On setting, press DELETE, then setting is canceled.
8
PV-6232
NOTE : If the file name and the folder are not consisted correctly, then the file is not played.
Below folder is created automatically in Recording, if there is not, please make
the folder same as below.
BUTTON
I(SKIP UP) or I
I
I
(SKIP DOWN) button.
BAUD RATE
19200bps
9600bps