Toshiba TLP-781U Service Manual page 45

2-2 Adjust the shading data
(1) Select adjusting color (Red/Green/Blue)
form the [Setting] menu.
(2) Select adjusting level (Max/Mid1/Mid2/Min)
form the [Setting] menu.
(3) Select the internal signal patern. (White Patern)
Set the following level and press [OK] button.
After setting push [Close] button.
Note:
You must change the builtin signal level corresponding
to the chosen level.
Example:
If you select [Mid1], set the builtin signal level 40%.
(4) Select the adjusting area (check box). Click the
[up] or [down] button to change the shading data.
(Note) When a number button is chosen, a straight line
can be chosen.
1-37
Max : 60%
Mid1 : 40%
Mid2 : 25%
Min : 10%