Related Manuals for ZuumMedia D16960H-H-BK
Summary of Contents for ZuumMedia D16960H-H-BK
-
Page 1: User Manual
Model: D16960H-H-BK 16 Channel 960H High Performance Standalone DVR with HDMI 1080p Output User Manual 8805 Jones. Rd Ste C104, Houston Texas 77065 * 1-888-861-7351 * www.zuummedia.com... - Page 2 Digital Video Recorder User Manual Statement: This manual may contain several technical inaccuracies or typographical errors, or places that do not match the product. If you have any unsolved problems in the process of using product according to this manual, please contact our technical support department. The content of this manual may be updated at irregular intervals without prior notice.
-
Page 3: Table Of Contents
Digital Video Recorder User Manual Table of Contents Chapter 1 Product Introduction ..................1 ....................1 1.1 Overview ..................1 1.2 Main Features Chapter 2 Installation Guide ....................4 ................4 2.1 Open-package Check ..................4 2.2 Install Hard Drive ................5 2.3 Front Panel Description ................ - Page 4 Digital Video Recorder User Manual ..................19 4.5.2 Motion ..................20 4.5.3 Sensor ..............20 4.5.4 Reboot the System ................21 4.6 Alarm Configuration ..................21 4.6.1 Sensor ..................24 4.6.2 Motion ................. 26 4.6.3 Video Loss ................27 4.6.4 Other Alarm ..................
- Page 5 Digital Video Recorder User Manual Chapter 6 Remote Surveillance ..................54 ................54 6.1 IE Remote Surveillance ..................54 6.1.1 On LAN ..................55 6.1.2 On WAN ................57 6.2 Remote Live Preview ............. 58 6.2.1 Symbol and Function Definition ................
- Page 6 Digital Video Recorder User Manual ................86 7.6.4 Switch Channel ................87 7.6.5 PTZ Control ................88 7.6.6 Local Video ................89 7.6.7 Saved Photos ................ 89 7.6.8 Switch Language ................90 7.6.9 Video Remote ............... 90 7.6.10 Real-Time Alarm Appendix A FAQ ......................
-
Page 7: Chapter 1 Product Introduction
Digital Video Recorder User Manual Chapter 1 Product Introduction 1.1 Overview This model of DVR (Digital Video Recorder) is designed for high performance CCTV solutions. It adopts state of the art video processing chips and embedded Linux system. Meanwhile, it utilizes most advanced technologies, such as standard H.264 with low bit rate, Dual stream, HDMI interface, SATA interface, VGA output, mouse supported, IE browser supported with full remote control, mobile view(by phones), etc., ensuring powerful functions and high stability. - Page 8 Digital Video Recorder User Manual BACKUP Support USB 2.0 devices to backup Support saving recorded files to a remote computer through internet RECORD & PLAYBACK Record modes: Manual, Schedule, Motion detection and Sensor alarm recording Support recycle after HDD full Support high-definition 1080P video output, and D1/960H video recording Resolution, frame rate and picture quality are adjustable 4 audio channels available...
- Page 9 Digital Video Recorder User Manual SECURITY Customize user right: log search, system setup, shut down, two way audio, file management, disk management, remote login, live view, manual record, playback, backup, PTZ control and remote live view Support 1 administrator and 63 users Support event log recording and checking NETWORK Support TCP/IP, DHCP, PPPoE, DDNS protocol...
-
Page 10: Chapter 2 Installation Guide
Digital Video Recorder User Manual Chapter 2 Installation Guide 2.1 Open-package Check When you receive the DVR, please check the unit and the accessories: First, please check whether there is any visible damage to the package appearance. The protective materials used for the package of the DVR can protect most accidental clashes during transportation. -
Page 11: Front Panel Description
Digital Video Recorder User Manual 1. This series support a SATA hard drive. Please use the hard drive recommended by the manufacturers for security and safe field. Please refer to Appendix C Compatible Devices 2 . 2. Please calculate HDD capacity according to the recording setting. Please refer to Step1: Disassemble the screw and open the top cover. -
Page 12: Rear Panel Description
Digital Video Recorder User Manual The descriptions of front panel interface are shown as follows: Fig 0-2 Front Panel Item Name Description Receive the signal of remote controller. Hard disk status indicator. When HDD is writing or reading, the light is white. Network data indicator. -
Page 13: Remote Controller
Digital Video Recorder User Manual Fig 0-3 Rear Panel Item Name Description V-IN Video signal input. Audio input: connect to pickup and other audio collecting A-IN equipment. Audio output: connect to sound box and other audio A-OUT output equipment. CVBS video signal output: connect to monitor with BNC V-OUT interface. - Page 14 Digital Video Recorder User Manual Step1: Open the battery cover of the remote controller Step2: Place batteries. Please take care the poles (+ and -) Step3: Replace the battery cover Notice: Frequently defect checking as following: 1. Check batteries poles 2.
- Page 15 Digital Video Recorder User Manual Item Name Function E-ZOOM Button To electronic amplify the single channel. MENU Button To enter the sub menu. Multi Screen To choose multi-screen display mode. Button Single Screen To choose single -screen display mode. Button Direction and Direction Button: move cursor to select items.
-
Page 16: Control With Mouse
Digital Video Recorder User Manual 2.6 Control with Mouse 2.6.1 Connect Mouse It supports USB mouse through the USB ports. Note: If mouse is not detected or doesn't work, user can change a mouse to try. 2.6.2 Use Mouse In live: Double-click left button on one camera to be full screen display. Double-click again to return to the previous screen display. -
Page 17: Chapter 3 Basic Function Instruction
Digital Video Recorder User Manual Chapter 3 Basic Function Instruction 3.1 Power On/Off 3.1.1 Power On Before you power on the unit, please make sure all the connection is good. Step1: connect with the source power; switch on the power button near the power port in the rear panel. -
Page 18: Login
Digital Video Recorder User Manual window. Step2: click OK, the unit will power off after a while. Step3: disconnect the power. 3.2 Login User can login and logout the DVR system. User cannot do any other operations except changing the multi-screen display once logout. Fig 3-1 Login Notice: blank. -
Page 19: Live Preview
Digital Video Recorder User Manual 3.3 Live Preview Fig 3-2 live preview interface Symbol Meaning Green Manual record Yellow Motion detection record Alarm record Blue Schedule record 3.4 Live Playback Click of control menu to playback the record, refer to Fig3-3. User can click the relevant buttons on the screen to do operation. - Page 20 Digital Video Recorder User Manual Fig 3-3 live playback...
-
Page 21: Chapter 4 Main Menu Setup Guide
Digital Video Recorder User Manual Chapter 4 Main Menu Setup Guide 4.1 Control Menu Right click to display the control menu, refer to Fig 4-1: Fig 4-1 control menu Single: Click this button to pop up the single channel selection box. Multi: Click this button to pop up the multi-channel selection box. - Page 22 Digital Video Recorder User Manual Record: Click this button to record current video. Playback: Click this button to playback the recorded files; click the relevant buttons on the screen to control playback. Main Menu: Click button to pop up the window shown in Fig 4-2; then click Setup button to pop up the window shown in Fig 4-3.
-
Page 23: Basic Configuration
Digital Video Recorder User Manual 4.2 Basic Configuration Basic configuration includes three submenus: system、date& time and DST. 4.2.1 System Enter into Main Menu Setup Basic System; refer to Fig 4-4: User can setup the device name, device ID, video format, max online users, video output, language, etc. -
Page 24: Date & Time
Digital Video Recorder User Manual ： ， Note When switching among BNC VGA and HDMI, it will change the menu output mode, please connect to the corresponding device for control. Language: Select the menu language; built-in multi-languages. Note: Change the language or video output, the device needs to login again. Screensaver[S]: Set the screensaver interval time. -
Page 25: Dst
Digital Video Recorder User Manual 4.2.3 DST Enter into Main Menu Setup Basic DST; refer to Fig 4-6: Enable Daylight Saving Time , and set time offset, mode, start & end time. Fig 4-6 basic configuration-DST 4.3 Live Configuration Live configuration includes three submenus: live, main monitor and mask. 4.3.1 Live Enter into Main Menu Setup Live Live;... -
Page 26: Main Monitor
Digital Video Recorder User Manual brightness, hue, saturation and contrast of channel video, default setting; All: T nt setup, user can set all channels with same parameters. Live Rec Status: Tick off it, the upper left corner of the screen will appear a status icon when manual recording or trigger recording. -
Page 27: Mask
Digital Video Recorder User Manual Fig 4-9 live configuration-main monitor 4.3.3 Mask Enter into Main Menu Setup Live Mask, user can set private mask area on the live image, refer to Fig 4-10: Fig 4-10 live configuration-mask Set mask area: Click Setting button, then click and drag cursor to set the privacy... -
Page 28: Record Configuration
Digital Video Recorder User Manual area of video image. An image can be entirely or partially masked, it supports 4 areas (superposable) at maximum. Click right mouse to return to the previous interface. Refer to Fig 4-10(a) and Fig 4-10(b): Delete mask area: Select a certain mask area, double click left mouse to delete that area, click right mouse to return to previous interface. -
Page 29: Record Bitrate
Digital Video Recorder User Manual Fig 4-11 record configuration-enable 4.4.2 Record Bitrate Enter into Main Menu Setup record record bitrate; refer to Fig 4-12: Fig 4-12 record configuration-record bitrate Set the resolution, frame rate, encode, quality and max bitrate. , user can set all channels with same parameters. -
Page 30: Time
Digital Video Recorder User Manual setting; click E Note: If frame rate surpasses the maximum resources of device, the value will be adjusted automatically. Parameter Meaning Resolution The range of options: synchronize with configured device, such as CIF Range from 1~30（NTSC）or 1~25(PAL) (Resolution and frame rate are determined by the parameter specifications of specific type) Encode... -
Page 31: Stamp
Digital Video Recorder User Manual Post-alarm Record Time: Set the delay time to stop the record after the alarm is finished. Expire [Days]: The hold time of recorded files. If the recorded files are overdue, they will be deleted automatically. Tick off , user can set all channels with same parameters. -
Page 32: Recycle Record
Digital Video Recorder User Manual Fig 4-14(a) Before drag Fig 4-14(b) After drag 4.4.5 Recycle Record Enter into Main Menu Setup record recycle record. When the storage space Recycle R earliest storage files and keep recording, otherwise it will stop recording and generate alarm automatically. Note: The space size of recorded files is mainly determined by the image quality, frame rate and resolution, the higher their parameter settings, the greater the disk space required. -
Page 33: Schedule
Digital Video Recorder User Manual submenus: schedule, motion, sensor and reboot the system; refer to Fig 4-15: 4.5.1 Schedule Fig 4-15 schedule configuration-schedule The column means the seven days of a week from Monday to Sunday; the row means 24 hours of a day. Step1: Select channel;... -
Page 34: Motion
Digital Video Recorder User Manual Fig 4-16 schedule configuration-week schedule Step4: User can copy and apply channel settings to the other channel or all channels. specified channel schedule to other channel. Step5: interface. 4.5.2 Motion The interface of motion detection configure is shown in Fig 4-17: Fig 4-17 schedule configuration-motion... -
Page 35: Sensor
Digital Video Recorder User Manual The setup steps of motion are familiar with schedule; user can refer to 4.5.1 Schedule for details. Note: The default schedule of motion detection is full-selected, that is, the color of schedule setting interface is blue. 4.5.3 Sensor The interface of sensor alarm configure is shown in Fig 4-18: Fig 4-18 schedule configuration-sensor... -
Page 36: Alarm Configuration
Digital Video Recorder User Manual Fig 4-19 schedule configuration-reboot the system 4.6 Alarm Configuration Enter into Main Menu Setup alarm. Alarm configuration includes five submenus: sensor, motion, video loss, other alarm and alarm out. 4.6.1 Sensor Sensor includes three submenus: basic, alarm handling and schedule. ①... - Page 37 Digital Video Recorder User Manual parameters. ② Alarm Handling Refer to Fig 4-21. Select the holding time of sensor alarm; click Setting button to pop up a window, refer to Fig 4-22: Fig 4-21 alarm configuration-sensor-alarm handling Fig 4-22 alarm handling-trigger Buzzer: After selecting Buzzer alarm, there will be triggered the buzzer buzzing when alarm is triggered;...
- Page 38 Digital Video Recorder User Manual Show Full Screen: Pop up full screen of channel video (optional) when alarm is triggered; To Alarm Out: Linkage specified alarm output with built-in relay when alarm is triggered. Email: Enable this function, the information of sensor alarm will be sent to mailbox. The notification email can contain text messages and images.
-
Page 39: Motion
Digital Video Recorder User Manual 4.5.1 Schedule for details. Note: The default schedule of sensor alarm is full-selected, that is, the color of schedule setting interface is blue. Fig 4-24 alarm configuration-sensor-schedule 4.6.2 Motion Motion includes two submenus: motion and schedule. ①... - Page 40 Digital Video Recorder User Manual Step1: Enable motion detection alarm; select the alarm holding time. Step2: C window, as shown in Fig 4-26. The setup steps of motion trigger are familiar with sensor alarm handling; user can refer to Chapter 4.6.1 Sensor alarm handling for more details. Step3: Click motion area to pop up a window, as shown in Fig 4-27:...
-
Page 41: Video Loss
Digital Video Recorder User Manual Fig 4-28 motion-schedule 4.6.3 Video Loss The interface of video loss configure is shown in Fig 4-29. Click Trigger button to pop up a window, as shown in Fig 4-30, the setup steps of trigger are familiar with sensor alarm handling;... -
Page 42: Other Alarm
Digital Video Recorder User Manual Fig 4-30 video loss-trigger 4.6.4 Other Alarm Step1: Refer to Fig 4-31, select the alarm type, set the trigger options. When the selected alarm is triggered, it will trigger the relevant alarm. Fig4-31 alarm configuration-other alarm Select : set a threshold value for remaining HDD space. -
Page 43: Alarm Out
Digital Video Recorder User Manual Step2: interface. 4.6.5 Alarm Out Alarm out includes three submenus: alarm out, schedule and buzzer. ① alarm out Refer to Fig 4-32, user can self-define relay name and select holding time of alarm out. , user can set all channels with same parameters. Fig4-32 alarm configuration-alarm out ②... -
Page 44: Network Configuration
Digital Video Recorder User Manual Fig4-33 alarm configuration-schedule ③ Buzzer Tick off Buzzer to turn on the switch of alarm sound, set buzzer alarm hold time. It will trigger the sound alarm when alarm is triggered. 4.7 Network Configuration Enter into Main Menu Setup Network. Network configuration includes five submenus: network, sub-stream, Email, WIFI setup and other settings. -
Page 45: Sub-Stream
Digital Video Recorder User Manual Fig 4-34 network configuration-network Note: You may want to use a different port than the default HTTP port 80. If so, you need to configure your DVR to use the port you want. After configured, remember that you have to specify its port number in the URL (e.g. -
Page 46: Email
Digital Video Recorder User Manual Fig 4-35 network configuration-sub-stream Parameter Meaning The range of options: synchronize with configured device, Resolution such as QCIF The range of options: synchronize with configured device. (Resolution and frame rate are determined by the parameter specifications of specific type) Encode Two options: VBR and CBR The higher the grade is, the clearer the recorded image... -
Page 47: Wifi Setup
Digital Video Recorder User Manual Fig 4-36 network configuration-email SMTP Server: Outgoing Mail Server Address. Mail server addresses are different for different Email service providers, e.g. the SMTP server of 163 mailbox is smtp.163.com, the SMTP server of Gmail mailbox is smtp.gmail.com. Port: Port number of SMTP server, usually is 25, or it may be 587, 993 or 465, etc. -
Page 48: Other Settings
Digital Video Recorder User Manual Fig 4-37 network configuration-WIFI setup 4.7.5 Other Settings Bind the device with a fixed domain name, so that user can visit the device no matter how the public IP changes. Enable DDNS function, select the DDNS server and update interval, enter the user name, password and host domain name registered in DDNS server, such as MyDVR.no-ip.org. - Page 49 Digital Video Recorder User Manual Enabling UPNP function can automatically map the port currently in use to router. Note: The domain name server that selected by user is a banding domain name of DVR. User should logon the website which provided by the server supplier to register a user name and password firstly, and then apply a domain name on line for the server.
- Page 50 Digital Video Recorder User Manual 1． Domain Name Registration (Take www.no-ip.com for example） Open the web browser (Internet Explorer by default) and enter http://www.no-ip.com in the address bar. Step1: create an account Click th drop-down menu Select the type of registration according to the features introduced. In this paper, we take for example.
- Page 51 Digital Video Recorder User Manual So please click the URL link to activate your account in the confirmation email, and then automatically Step3: login to your account Select n the top of No-IP home page to pop up drop-down menu, or click Client Login interface.
- Page 52 Digital Video Recorder User Manual 2． Enable DDNS on the DVR Enter into Main Menu Setup Network other settings. DDNS: tick off; DDNS type: choose www.no-ip.com; User Name: the account you created at no-ip.com; Password: the password of your account at no-ip.com. Host Domain: enter the host name you created at no-ip.com;...
-
Page 53: User Management Configuration
Digital Video Recorder User Manual 4.8 User Management Configuration Enter into Main Menu Setup Users; refer to Fig 4-39. Click Add button to pop up a window, as shown in Fig 4-40: Fig 4-39 user management configuration... - Page 54 Digital Video Recorder User Manual Fig 4-40 add-general General: Enter the new user's name and password; select user type: normal and ① advance; or tick off Binding PC Mac Address , input the MAC address of the PC as required; click OK button to add this user into the user list; click Exit button to exit the current interface.
-
Page 55: Configuration
Digital Video Recorder User Manual In the user management interface, select a user in the user list, click Setup button to modify user type, binding PC MAC address and user authority. Select a user in the user user. Select a user and click Change Password button to modify the password of this user. -
Page 56: Advanced
Digital Video Recorder User Manual Parameter Meaning Address Address of the PTZ device Baud rate of the PTZ device; synchronize with Baud rate configured device Communication protocol of the device; Protocol synchronize with configured device Simulative If enabled, whether the PTZ device supports or not, Cruise the presets will cruise 4.9.2 Advanced... - Page 57 Digital Video Recorder User Manual Fig 4-44 advanced-preset setting Fig 4-45 preset 2) Select a channel or all channels which need to configure PTZ parameters; control the dome rotates up, up left, left, left down, down, right down, right, up right and stop rotating;...
- Page 58 Digital Video Recorder User Manual Cruise 1) Click of cruise in Fig 4-43, then in the list (8 cruise lines can be added at most), as shown in Fig 4-46. Fig 4-46 advanced-cruise setting refer to Fig 4-47. Fig 4-47 cruise setting-modify 3) Click add button, choose which preset to use, and set its speed and time, then click...
- Page 59 Digital Video Recorder User Manual click button to adjust the order of selected preset. 4) Click Preview button to preview the selected cruise line, click OK button to save the setting, click Exit button to exit current interface. 5) Select a cruise line in the list, click Delete button to delete it; click Clear All button to clear all cruise lines;...
-
Page 60: Advanced Configuration
Digital Video Recorder User Manual 4.10 Advanced Configuration Enter into Main Menu Setup Advanced. Advanced configuration includes two submenus: reset and import/export. 4.10.1 Reset Click Reset button to pop up a warning window, then click OK button to restore factory settings and restart the device automatically, click Cancel button to exit the warning window. -
Page 61: Chapter 5 Manage Dvr
Digital Video Recorder User Manual Chapter 5 Manage DVR 5.1 Search and Playback Search configuration includes four submenus: time search, event search, file management and image. 5.1.1 Time Search Step1: Enter into Main Menu Search Time Search; refer to Fig 5-1: Fig 5-1 Search configuration-time search Step2: Select the channels which need to search data, set screen display mode;... -
Page 62: Event Search
Digital Video Recorder User Manual will appear a hide button, click it to expand the whole interface. Step4: Click Play button to playback record from the selected time; click the relevant buttons on the screen to do operation. The range of options synchronizes with configured device;... -
Page 63: File Management
Digital Video Recorder User Manual Step2: Select the channels which need to search data, set event type (motion, sensor); select a date, the highlight date in the calendar means have record data. Step3: Press Search button, the searched event information will be displayed in the event list. -
Page 64: Image
Digital Video Recorder User Manual pop-up message box to unlock this file. Delete: S OK button in the pop-up message box to delete this file. , user can lock/unlock or delete all files. Step4: Double click a file to playback. Click the relevant buttons on the screen to do operation. -
Page 65: Backup
Digital Video Recorder User Manual Save/ Save All: Save the current image / all images to the USB disk and other removable storage devices. Step4: Double click the image to playback record from the time when it was captured. 5.2 Backup This unit supports backup DVR data files by USB disk through the USB port. -
Page 66: Information
Digital Video Recorder User Manual 5.3 Information User can check the device information, including system, event, log, network and online users. 5.3.1 System Information Enter into Main Menu Information System. In this interface, user can check the device name, firmware version, launch date, etc. 5.3.2 Event Information Enter into Main Menu Information Event. -
Page 67: Online Users Information
Digital Video Recorder User Manual 5.3.5 Online Users Information Enter into Main Menu Information Online Users. In this interface, check all user information. Click Refresh button to refresh the current online user list. User can remote view and operate device through IE browser, ISS, CMS. 5.4 Manual Alarm Enter into Main Menu Manual Alarm. -
Page 68: Advanced
Digital Video Recorder User Manual 5.5.2 Advanced Enter into Main Menu Disk Management Advanced. User can check the hard s model, S/N, firmware, health status and S.M.A.R.T information. S.M.A.R.T function can monitor the s temperature, internal circuit and dielectric material, analysis the potential problems and warn so as to protect its data. -
Page 69: Chapter 6 Remote Surveillance
Digital Video Recorder User Manual Chapter 6 Remote Surveillance 6.1 IE Remote Surveillance In order to view the DVR from network, it must be connected to a LAN/WAN or Internet. The following introduces the connection and use of Internet. Remote access to the Internet has two types according to their online behavior. -
Page 70: On Wan
Digital Video Recorder User Manual Step8: Enter your user name and password. The default username is "admin", password is blank. Click "OK" to enter into preview interface, as shown below: IE browser preview 6.1.2 On WAN There are two ways for the DVR connect to internet. 1. - Page 71 Digital Video Recorder User Manual Step2: E Information Network information to obtain IP address, then input it in the browser, such as: http://210.21.229.138, user can enter the control download interface. Step3: The following setup steps are the same as steps 6-8 of Chapter 6.1.1 on LAN. 2.
-
Page 72: Remote Live Preview
Digital Video Recorder User Manual Owing to WAN address will change frequently, remote access is not very convenient, and users can access DVR by domain name. For example: e Setup Network configuration Other , select DDNS Server, enter the user name, password and host domain name registered in DDNS server (refer to network configuration), user can use the domain name to directly access DVR in the WAN access. -
Page 73: Symbol And Function Definition
Digital Video Recorder User Manual 6.2.1 Symbol and Function Definition (1) Channel Indicator (2) Screen Display Mode (3) Volume Adjustment (4) Snap Picture (5) Client Record: Record current video, and save them (6) Local Playback (7) Remote Manual Recording (8) Talkback Switch (9) Color Adjustment (10) PTZ Control (11) Channel Status: Display the status of main stream, sub-stream and local video... -
Page 74: Ptz Control
Digital Video Recorder User Manual Drag the slider to adjust the contrast of video. Restore the default values. Save the adjustment. 6.2.4 PTZ Control When DVR is connected to PTZ or communication device, user can control it on the client side. User can control the dome rotates up, up left, left, left down, down, right down, right, up right and stop rotating;... -
Page 75: Preview Control
Digital Video Recorder User Manual 6.2.5 Preview Control Click the right mouse on the live preview interface to pop up a pull-down menu, as shown below: Right-click menu Stream: DVR support dual stream: master stream and sub-stream. Master stream is HD channel with higher frame rate for every channel, but it needs higher network bandwidth;... - Page 76 Digital Video Recorder User Manual Remote playback interface Step1: Select the channels which need to search data, set screen display mode; select a date, the highlight date in the calendar means have record data. Step2: Press Search button, the searched record information will be displayed in the data information panel.
-
Page 77: Event Search
Digital Video Recorder User Manual (1) Play (2) Pause (3) Backward / Rewind (4) Fast Forward (5) Stop (6) Next Frame (7) Previous Section (8) Next Section (9) Full Screen (10) Volume (11) Process Bar (12) Channel Mode (13) Play Mode (14) Play Button (15) Snap Picture (16) Exit... -
Page 78: File Management
Digital Video Recorder User Manual Remote Event Search Step1: Select the channels which need to search data, set event type (motion, sensor); select a date, the highlight date in the calendar means have record data. Step2: Press Search button, the searched event information will be displayed in the event list. - Page 79 Digital Video Recorder User Manual Remote file management Step1: Select the channels which need to search data; select a date, the highlight date in the calendar means have record data. Step2: Press Search button, the searched file information will be displayed in the file list.
-
Page 80: Remote Backup
Digital Video Recorder User Manual 6.3.4 Remote backup User can backup data by IE browser via internet. Click button to enter the backup interface, as shown below: Remote backup interface Step1: Select the start & end time and channels, then click Search button to view the searched data information in the data list. -
Page 81: Remote Configuration & Management
Digital Video Recorder User Manual 6.4 Remote Configuration & Management 6.4.1 Remote Configuration User can configure the device remotely. It not only can set up the network configuration parameters, but also can set up other parameters through the network. Click button to enter the system configuration interface, as shown below. -
Page 82: Remote Check Information
Digital Video Recorder User Manual In the Upgrade interface, user can remotely upgrade the device system. You can also reboot the device. 6.4.3 Remote Check Information The system records the work status and operating procedure automatically. User can check the information about system, event, log, network and online users. Enter into INFO Log;... -
Page 83: Chapter 7 Mobile Surveillance
Digital Video Recorder User Manual Chapter 7 Mobile Surveillance You can remotely view Camera streams from your DVR, IPC and IP Dome on your ， Compatible Mobile Viewing Devices iPhone (4.0 and above) iPad (4.0 and above) Android(1.6 and above) NOTE: plan is required (not included). -
Page 84: For Android
Digital Video Recorder User Manual For Android 7.1 Main Functions Support Chinese and English; View the Cameras on real time via wifi and 3G; Support multi-channel switching; Support remote play; Support device configuration, modification and delete; Support photo view and save; Support video view and save;... -
Page 85: Application Running
Digital Video Recorder User Manual Fig 7-1 Fig 7-2 7.3 Application Running 7.3.1 Interface Description After successfully installed the application into mobile phones, it is ready to run, just click the ISS MOBILE icon in the main menu. The main interface looks like Fig 7-3: corresponding operation options, including device list, local video, photos, about, etc;... - Page 86 Digital Video Recorder User Manual Fig 7-3 Fig 7-4 Device List: Add a new device, or modify the device settings. Local Video: If ISS MOBILE has record function, after clicking video records, you will see the details of the records. The name of the record file will be generated by system default according to recording time.
-
Page 87: Live Preview
Digital Video Recorder User Manual Fig 7-5 7.3.2 Live Preview Click back key on top left in the main menu interface, back to display interface, refer to Fig 7-6: Fig 7-6... -
Page 88: Add Device
Digital Video Recorder User Manual Function Key Description Channel selecting: You can select the channels playing Select the group of channels Play / Stop Snapshot Video Records Quick Access Device List, edit and select the device Alarm function Left Slip to Display PTZ Control Button Control the directions of the Camera Zoom in / Zoom out Change focus and aperture... - Page 89 Digital Video Recorder User Manual Fig 7-7 Device Name: The names of equipment, which can help you identify different devices, for examples, you can type the names based on the location of the equipment. The name will be showed on the topside title bar of display interface. Address: DVR IP address (must be an Internet address) or DDNS.
-
Page 90: Switch Channel
Digital Video Recorder User Manual Fig 7-8 Fig 7-9 7.3.4 Switch Channel Figure 7-10 to switch channels Select the numbers showed in Area 3 in ; select Area 2 to switch channel-group, and then select the numbers in this channel-group to switch the channels. - Page 91 Digital Video Recorder User Manual Fig 7-10 Fig 7-11 Select the device which switched to, will show the channel list of this device, like Fig 7-12 as below: Fig 7-12 Select the channels in the channel list of this device, turn back to display interface to view the Camera of this channel.
-
Page 92: Ptz Control
Digital Video Recorder User Manual 7.3.5 PTZ Control 7-13 as below: Fig 7-13 Function keys of PTZ control as below: ：Control PTZ direction; ：Zoom in and zoom out; ：Change focus; ：Change aperture. 7.3.6 Local Video The videos will be saved on the phone after recording the videos. Steps as below: Note: If there is no memory card on phone, the record function will not work. - Page 93 Digital Video Recorder User Manual Fig 7-14 Delete: 7-14: 7-15 interface; 7-16: Fig 7-15 Fig 7-16 operation and back the last step.
-
Page 94: Saved Photos
Digital Video Recorder User Manual 2) You have to make sure there are video records, so that you could search the records; if not, you cannot search it. 7.3.7 Saved Photos The photos are the snap-shot when viewing the Cameras which saved on the album. You also can check and batch save and delete etc. -
Page 95: For Iphone
Digital Video Recorder User Manual Fig 7-17 Fig 7-18 For Iphone 7.4 Main Functions Support Chinese and English; View the Cameras on real time via wifi and 3G; Support multi-channel switching; Support remote play; Support device configuration, modification and delete; Support photo view and save;... -
Page 96: Installation
Digital Video Recorder User Manual 7.5 Installation Users can free download this app above, like Fig 7-19 as below. Router port forwarding is required. phone, like Fig 4-20 as below: Fig 7-19 Fig 7-20 7.6 Application Running 7.6.1 Interface Description After successfully installed the application into mobile phones, it is ready to run, just click the ISS MOBILE icon in the main menu. - Page 97 Digital Video Recorder User Manual 7-21 as below: corresponding operation options, including device list, photos, video records, about & help, etc; refer to Fig 7-22: Fig 7-21 Fig 7-22 Device List: Add a new device, or modify the device settings. Remote Play: Access the device recorded clips and view the video.
-
Page 98: Live Preview
Digital Video Recorder User Manual Fig 7-23 next login. If turn it off, it will not display your last time video on the next login. windows in player interface. Priority Type: Select the desired type: Real Time and Fluency. Alert Sound: Select the voice prompts when the device alarm is triggered. Play Audio: Open and close the device output sound. - Page 99 Digital Video Recorder User Manual Fig 7-24 Function Key Description Channel selecting: You can select the channels playing Select the group of channels Play / Stop Delete Display Records Snapshot Video Records Real-time Alarm Quick Access Device List, edit and select the device...
-
Page 100: Add Device
Digital Video Recorder User Manual Left Slip to Display PTZ Control Button Control the directions of the Camera Zoom in / Zoom out Change focus Control aperture 7.6.3 Add Device If this is the first time to use ISS MOBILE app, you need to put in all the information needed. -
Page 101: Switch Channel
Digital Video Recorder User Manual Address: DVR IP address (must be an Internet address) or DDNS. Port: It means mobile phone port, and you can acquire port number in the setting information of the device. Please use the fixed port: 554 here. User ID: The user name of terminal device. -
Page 102: Ptz Control
Digital Video Recorder User Manual Fig 7-28 Fig 7-29 Select the device which switched to, will show the channel list of this device. Select the channels in the channel list of this device, turn back to display interface to view the Camera of this channel. 7.6.5 PTZ Control 7-30 as below: Fig 7-30... -
Page 103: Local Video
Digital Video Recorder User Manual ：Change aperture. 7.6.6 Local Video The videos will be saved on the phone after recording the videos. Steps as below: Play Video: 7-31: Click the video record, for example 20121011134721.mp4, to view this video record. Batch Save: 7-31: 7-32:... -
Page 104: Saved Photos
Digital Video Recorder User Manual Fig 7-33(b) Fig 7-33(c) Delete： 7-31: 7-32: 7-33(a) and (c): main interface like Fig 7-31. operation and back the last step. 2) You have to make sure there are video records, so that you could search the records;... -
Page 105: Video Remote
Digital Video Recorder User Manual the application will be switched to English as well. 7.6.9 Video Remote You can access the device recorded clips with the app and view the video clips. Select the right device, channel and time then tap search, like Fig 7-34: 7.6.10 Real-Time Alarm When any channel has any alarming info, the app will show up in the main interface, like Fig 7-35:... -
Page 106: Appendix Afaq
Digital Video Recorder User Manual Appendix A Q1. Why the DVR cannot start after connected to the power? a. The adapter has been damaged. Please change an adapter. b. The power of the adapter is not enough. Please remove the HDD to check. c. -
Page 107: Use Mouse
Digital Video Recorder User Manual Q6. Cannot record a. Don't format HDD. Please format it manually first. b. Don't enable record function or incorrect setup. Please refer to 4.3 Record configuration and 4.4.1 Schedule. c. HDD is full and not enables recycle function. Chang a new HDD or enable recycle. Please refer to 4.3.5 Recycle record. - Page 108 Digital Video Recorder User Manual Fig 8-1 Fig 8-2 The first possible reason: hard-disk cable or data cable are not connected well. Solution: please check the connection of hard-disk cable and data cable to make sure they are connected well; if still not working, please unplug them and re-plugging again.
- Page 109 Digital Video Recorder User Manual to another same type DVR? And why must we format it again? When DVR only uses one hard disk, the hard disk removed from one to another same type DVR can work normally without format. However, when a DVR adds to a new hard disk, it will identify the hard disk as a new one and inquire whether to format no matter whether this hard disk used or not in another same type DVR before.
- Page 110 Digital Video Recorder User Manual Fig 8-3 b. Right click IE browser (refer to Fig 8-4), select Run as administrator to run browser. Fig 8-4...
-
Page 111: Appendix B Calculate Recording Capacity
Digital Video Recorder User Manual Appendix B Calculate Recording Capacity Make sure the hard disk formatted and installed to the DVR for the first time. 1、 Hard disk capability There is no limit for recording machine. We recommend 500G~2048G size to keep better stability. -
Page 112: Appendix C Compatible Devices
Digital Video Recorder User Manual Appendix C Compatible Devices 1. Compatible USB drive after test. Brand Capacity 512MB, 1G, 2GB Netac Kingston AIGO Smatter vider SanDisk 2. Compatible SATA CD/DVD writers after test Brand Model TECLAST GH22NP20/TL-22XD BENQ DW220S-0K4 LITEON DH 20A6S01C LITEON DH-20A4P02C... - Page 113 Digital Video Recorder User Manual Seagate Barracuda 7200.11 ST3160813AS 160G Seagate Barracuda 7200.10 ST380815AS Maxtor Diamondmax 21 STM3160215AS 160G HITACHI Deskstar HDS721616PLA380 160G HITACHI Deskstar WD WD1600JS 160G Samsung HD161HJ 160G...
-
Page 114: Appendix D Specifications
Digital Video Recorder User Manual Appendix D Specifications Channel number OPERATION LINUX SYSTEM VIDEO VIDEO SYSTEM NTSC/PAL Switch Selectable INPUT BNC*4,1.0Vp-p,75ohm BNC*8,1.0Vp-p,75ohm Video Output 1 CH BNC(1.0Vp- SPOT LOOP OUT VGA OUTPUT 800 x 600, 1024 x 768, 1280x 1024 HDMI OUTPUT OPTIONAL AUDIO... - Page 115 Digital Video Recorder User Manual RECORDING COMPRESSION H.264 Main Profile RECORDING Manual/Schedule/Motion Detection/Sensor MODE NTSC:704*480,352*240 RESOLUTION PAL:704*576,352*288 NTSC: 120FPS@D1 NTSC: 240FPS@CIF RECORD FRAME RATE PAL: 100FPS@D1 PAL: 200FPS@CIF QUALITY Worst, Worse, General, Good, Better, Best MOTION Sensitivity: Multi Level, 22*15Grid DETECTION WATER MARK PLAYBACK...
- Page 116 Digital Video Recorder User Manual GUI INTERFACE Supported GUI 16 Bit True Color PTZ PROTOCOL 1*RS485, Support multi Protocols BACKUP INTERNAL EXTERNAL 2 * USB2.0; Removable DVD-RW NETWORK FILE .dat / AVI GENERAL ALARM IN/OUT 8CH / 1CH Optional RS-485 1 Optional RS-232 UNIT...
Need help?
Do you have a question about the D16960H-H-BK and is the answer not in the manual?
Questions and answers