Manual Pop-up Modes
In P, S, A, M, and 0 modes, the flash must be raised manually. The flash will not fire if it
is not raised.
1
Raise the flash.
Press the M (Y) button to raise the flash.
2
Choose a flash mode (P, S, A, and M modes only).
Keeping the M (Y)
button pressed, rotate
the command dial until
the desired flash mode
appears in the
information display.
3
Take pictures.
The flash will fire whenever a picture is taken.
64 More on Photography
+
M (Y) button
Command
Information display
dial
M (Y) button