LG 60PY2DR Training Manual page 83

ALTERNATE DOWNLOAD INSTRUCTIONS
1. Turn on your laptop PC
2. Connect a null modem serial cable between laptop computer and TV.
3. Turn on TV.
4. Change baud rate of TV to "115200" using instart key on "adjust remocon"
5. Execute "TeraTerm" software in your laptop computer.
6. Go to "Setup" then "Serial Port" in TeraTerm.
7. Set the port number of your Laptop (Usually 1 or 2), Baud rate "115200", Data "8 bit", Parity
"none," Stop "1bit," flow control "none," Transmit delay "0 msec/char 0msec/line," and click
"OK,"
8. Press the enter key several times to check the laptop communication with the TV. If the cursor
moves down, the laptop is communicating with TV.
9. Type the model # (This has to be the factory model #)
10. Hit "d" on your laptop keyboard and hit "enter" key on your laptop keyboard
11. Hit "f0" (F and Zero) on your laptop keyboard and hit "enter" key on your laptop keyboard
NOTE: Read the items in the menu. They may differ by model and production series, thus f0 is correct
for some models but not others. Just keep in mind you are using a serial port and wanting to
upgrade the firmware.
12. Hit "10" (1 and Zero) on your laptop keyboard and hit "enter" key on your laptop keyboard.
NOTE: Read the items in the menu. They may differ by model and production series, thus 10 is correct
for some models but not others. Just keep in mind you are using a serial port and wanting to
upgrade the firmware.
13. Go to "File" then "Send file" on TeraTerm Select the file "DU42PY 10X rom.img" for downloading.
14. Hit "enter" on the laptop's keyboard.
Plasma Training
SOFTWARE UPDATES
83
Software Updates