Option Menu - LG 60PY2DR Training Manual

TIP: Pressing the SLEEP button on the Remote Control will also activate the Sleep Timer
function. Once activated, each subsequent press of the SLEEP button will change the
time interval (10, 20, 30, 60, 90, 120, 180, 240 minutes, or off).
AUTO OFF
The Auto Off function, when activated, will automatically turn the TV off if there is no input signal
for 10 minutes. This feature is useful when watching DVD Movies or using a Cable TV Box.
1. Press MENU on the Remote Control or Front Controls
2. Use the /
3. Use the /
4. Use the /
5. Press ENTER to save the selection
6. Press EXIT to completely exit the On-Screen Menu or MENU to return to the previous
menu.

OPTION MENU

The Option Menu houses general options and settings for additions control of the TV.
ASPECT RATIO CONTROL (ARC)
The Aspect Ratio Control function adjusts the way that 4:3 programs are displayed.
Set By Program – Disables ARC processing and allows the original aspect ratio of the incoming
program to be displayed.
4:3 – Displays 4:3 content without any correction, showing bars on both sides of the picture
16:9 – Displays 4:3 content stretched horizontally, consuming the entire screen
Horizon – Displays 4:3 content stretched only at the sides to consume the entire screen. The
center portion of the image is not stretched.
Zoom 1 – Enlarges the overall size of 4:3 content to consume the entire screen without and
distortion. However, the upper and lower portions of the image will be cropped.
Zoom 2 – Enlarges the overall size of 4:3 content to a greater extent than Zoom 1
Cinema Zoom – Adjustable enlargement of the Zoom function. (1-16)
1. Press MENU on the Remote Control or Front Controls
2. Use the /
3. Use the /
4. Use the /
5. Press ENTER to save the selection
6. Press EXIT to completely exit the On-Screen Menu or MENU to return to the previous
menu.
CINEMA 3:2 MODE SETUP
The Cinema 3:2 Mode provides additional process for 480i content (particularly movies) to help
reduce the flickering caused during the conversion of 24 fps film to 30fps television signals.
1. Press MENU on the Remote Control or Front Controls
2. Use the /
3. Use the /
Plasma Training
buttons to highlight the TIME Menu (4
buttons to highlight Auto Off (6
buttons to select Off or On
buttons to highlight the OPTION Menu (5
buttons to highlight Aspect Ratio (1
buttons to select the desired ARC setting
buttons to highlight the OPTION Menu (5
buttons to highlight Cinema 3:2 Mode (2
th
Menu) and press
th
Item) and press
th
Menu) and press
st
Item) and press
th
Menu) and press
nd
Item) and press
25
OPERATION
Operation