Deactivating the Red-Eye Reduction Lamp
You can deactivate the red-eye reduction lamp that lights up to reduce
red-eye when the flash is used in low-light shots.
1
Access the [Flash Settings] screen.
●
Press the [
Settings] on the [
the [ ] button ( = 25).
2
Configure the setting.
●
Choose [Off] for [Red-Eye Lamp]
( = 25).
●
To restore the original setting, repeat this
process but choose [On].
Changing the Image Display Style after Shots
You can change how long images are displayed and what information is
displayed immediately after shooting.
Changing the Image Display Period after Shots
1
Access the [Review image after
shooting] screen.
●
Press the [
[Review image after shooting] on the
[
] tab, and then press the [ ] button
( = 25).
Still Images
Movies
Quick
] button, choose [Flash
2 sec., 4 sec.,
] tab, and then press
8 sec.
Hold
Off
Change the way images are displayed after shots as follows.
Still Images
Movies
Off
Detailed
] button, choose
2
Configure the setting.
●
Press the [ ][ ] buttons to choose
[Display Time]. Press the [ ][ ] buttons
to choose the desired option.
●
To restore the original setting, repeat this
process but choose [Quick].
Displays images only until you can shoot again.
Displays images for the specified time. Even while
the shot is displayed, you can take another shot by
pressing the shutter button halfway again.
Displays images until you press the shutter button halfway.
No image display after shots.
Changing the Screen Displayed after Shots
1
Set [Display Time] to [2 sec.],
[4 sec.], [8 sec.], or [Hold] (= 40).
2
Configure the setting.
●
Press the [ ][ ] buttons to choose
[Display Info]. Press the [ ][ ] buttons to
choose the desired option.
●
To restore the original setting, repeat this
process but choose [Off].
Displays only the image.
Displays shooting details ( = 105).
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
4
P Mode
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
40