LST Orbis RB-10004 Specifications

Detector Base Series ORBIS
RB-10004 with Relay Output
• Suitable for automatic detectors in
conventional technology
• Relay output with dry change-over
contact
• Screw terminals for secure
connection of multiple wires
• Mechanical theft protection can be
activated
Description
The Detector Relay Base RB-10004 with integrated
relay output is designed for the easy connection of au-
tomatic detectors Series ORBIS. Due to its robust multi-
wire screw terminals, the detectors can be wired with
ease, thus achieving a secure and durable connection.
In addition, a relay output with a dry change-over contact
is integrated into the detector base. The relay output is
activated through the alarm activation of the inserted
Specifi cations
Operating voltage
Current consumption
Contact rating
Ambient temperature
Relative humidity
Dimensions ø × H
Colour
Weight
Order number
Order name
Building Safety. Building Security.
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED
detector and remains active until the alarm is reset on
the fi re detection control panel.
The base has been designed for surface mounting in
dry rooms. For special applications a range of acces-
sories (for moist room, false ceiling or fl ush installation)
is available.
A mechanical theft protection of the detector can
optionally be activated at the detector base.
Supply through the detector line voltage
7mA (active)
1A at 30VDC
- 40°C to +70°C
10 – 98% (no condensation)
100 × 24 (mm)
white
80g
246041
Detector Relay Base/Conv./ORBIS/Apo RB-10004
A
RB-10004_DBL_LST_EN_0804.PDF • PAGE 1