Advertisement
Track record set
Internet access
point settings
Mana
gement
Platform setting
SMS forward
settings
Phone monitory
settings
The above details for reference only, we reserve the rights to make amendment without prior notice.
All copyright are reserved.
P.S :
For change the Time Zone of 13, the command is :
31#01300#0
24#0 （Tracking off）
24#60 (Tracking open）
24## （Delete）
32# Access Point
# User name # p
assword
34#0 （OFF）
34#1 （Open Default）
35#0 （OFF Default
）
35#1 （open）
23# Number
24#60 (Default)（60 means 60 Mins）(from 1-99 mins).
Turn it on to set time (unit: minute); interval tracking record will
be uploaded to the management platform. The LCD displays
to show tracking record is on. The tracing data
Will be stored nto the platform. The historical track can be
i
viewed on the platform too. To save power,just turn off i
platform connection no longer need.
32#cmnet##
Set the GPS tracker to access the network through cmnet access
point. Usually the user name and password are not needed to fill
and let it blank. For example: China Mobile: cmn
Unicom: uniwap; PCCW :
LCD display
to show the management platform open, the
terminal connecting through the GPRS network, then the
platform can send commands to the GPS tracking device.To
save power,just turn off if platform connection no longer ne
To forward the received SMS to the guardian mobile phone.
( messages from the guardian excluded)
This's available f
or guardian in mainland China only.
23# Ask for dialing back.
23#12345678910
Monitor number refers to the number which the tracker dialed
back; It can be a mobile phone or non-mobile.
pccw
f
et; China
ed.
Advertisement
