Advertisement
When power on, press
altitude, speed
IV、 Monitory function
Press the key
1.
Message: To check message received.
Press the key
no message, the screen will be blank; if with message, it will enter the message
stored with 19 messages. If a new message comes in, the first message will be deleted automatically.
Weather: To view the current location weather
2.
will be displayed. Shortcuts: Main interface buttons
3.
My position: To view the current geographic location information. Press the key
message will be displayed. Shortcuts: Main interface bu
4.
Language: Set the display language.
5.
Time setting: Set the time zone, daylight saving time.
6.
Alarm: Set alarm.
7.
GPS Status: Check current location's GPS satellite signal searching strength.
Press the key
satellite searching mode interface, if GPS is in normal, and also in the GPS signal covered area, LCD
screen will display the status diagram of the satellite and satellite signal strength.
Inte
rface indication
The white c
haracters stand for the number of satellites. Green ones stand for the
When lower
Usually the s
8.
GPS Info: When power on, press the key
to select the GPS functions (positioning status, latitude, longitude,
, direct
ion). Then the tracker will turn on the GPS function automatically.
to enter the function menu interface, there are som functions :
once to enter the function menu interface, press
to enter the function menu interface, press
than 30, it means the signals are too weak, please move to some
atellites density will not over 50. It's shown as below:
info
rmation. Press the key
.
ttons
.
to select GPS status, enter the GPS
to enter the function menu interface
e
to sele
ct the m
essage.If there's
list i
nterface. It can be
and the m
density of the signals.
other Spacious place.
, then
essage
and the
c
hoose the
Advertisement
