Loading Labels - LEITZ ICON Quick Start Manual

Getting to Know the Label Cartridge
Leitz Icon Intelligent Label Cartridges are easy to load into the printer and are recyclable*. Each
cartridge has a folding label guide that opens to load and print labels and closes to protect labels
during storage. The Intelligent Label Cartridge uses a special cartridge identification chip to relay
information about the label cartridge, such as the type and size of the labels, the capacity of the
label cartridge, and the number of labels remaining, to the software.
A
B
C
A Folding label guide B Label exit slot
Avoid handling the cartridge identification chip as this may damage the chip. If the chip becomes
NOTE
damaged, the label cartridge may not work properly.
*Intelligent Label Cartridges may not be recyclable in your area.
C Cartridge identification chip
3

Loading Labels

Push the button on the top of the printer to
1.
open the cartridge door.
Lift the label guide latch as shown.
2.
Pull open the folding label guide on the
3.
label cartridge until it locks into place.
Avoid handling the cartridge
NOTE
identification chip as this may
damage the chip. If the chip becomes
damaged, the label cartridge may not
work properly.
Place the cartridge into the printer as
4.
shown. Make sure the cartridge is
centered and seated securely in the
printer.
Lower the label guide latch.
5.
Close the cartridge door.
6.
The printer automatically feeds the labels
to the starting position.