Miele KFN 12927 SD edt/cs Operating And Installation Instructions page 56

Changing the door hinging
^ Fit hinge pin i into middle hinge
plate k in the lower door. The ridge
on the hinge pin will fit into the notch
in the hinge plate.
^ Then fit the upper door on middle
hinge pin i.
^ Close the upper door.
^ Fit hinge plate c onto the opposite
side and secure it with screws d.
If necessary drill pilot holes for the
screws or use a battery operated
screwdriver.
56
^ Fit covers a and b to their opposite
sides.
^ Align the door with the appliance
housing using the long slots in the
lower hinge plate. Then tighten the
screws.