Miele KFN 12927 SD edt/cs Operating And Installation Instructions page 23

Setting the temperature in the
PerfectFresh zone
^ Press the Super freeze button and
hold for 5 seconds until the indicator
light flashes.
In the temperature display the LEDs
light up to show the last setting
selected and the Super freeze
indicator light flashes
^ To set the temperature in the freezer
section, press the button repeatedly
until the required setting is displayed.
The combination of LEDs lit is
continuous; if the setting 9 is
reached, it starts again with 1.
^ Press the Super freeze button to
confirm a newly selected setting.
The correct temperature
^ Press the right hand master switch to
switch the whole appliance on or off
or
^ Wait for 5 minutes. The newly
selected value will be taken up
automatically.
You have now left settings mode. The
refrigerator section temperature display
shows the desired temperature and the
Super freeze button is no longer lit up.
If the Super freeze function had
been selected before setting the
temperature, the indicator light for
the Super freeze button comes on
again after leaving settings mode.
23