Getting Started; Serial Number (Esn) And Authorization Code - SPOT GEN3 User Manual

SECTION 2: GETTING STARTED
Your SPOT Gen3 requires an active SPOT subscription to communicate. To do this,
simply activate your device using the instructions outlined below.
WITH YOUR SPOT
WHAT YOU NEED
• Your SPOT Gen3
• One of these three power sources:
- 4 AAA Energizer Ultimate Lithium 8x batteries (L92); included
®
- 4 AAA Energizer NiMH rechargeable batteries (NH12)
®
- Line Power with a 5v USB connection
• User Guide
INSTALL THE INCLUDED BATTERIES
1. Loosen the screws to open the battery cover.
2. Write down the ESN and Authorization Code for use during service activation.
3. Install 4 AAA Energizer Ultimate Lithium 8x batteries or NiMH rechargeable batteries.
®
4. Replace cover, tighten screws with a screwdriver or coin. It is important that you
fully tighten the battery cover to maintain SPOT's waterproof seal.
4
AT FINDMESPOT.COM
WHAT YOU NEED
• Personal contact information
• Emergency contact information
• Valid email address
• Credit card information
• SPOT electronic serial number (ESN) and authorization code.
ACCOUNT SETUP
1. Go to FindMeSPOT.com/Activate.
2. Existing SPOT customers should login to their current SPOT account to add their new device. New
customers will need to select: Set Up New Account.
3. Follow the instructions given within the activation portal; do not skip forms or pages.
4. Choose the services you wish to add (like the new upgraded Unlimited and Extreme Tracking) to
your SPOT device and confirm your order to finish the activation process.
SERIAL NUMBER (ESN) AND
AUTHORIZATION CODE
These codes are located inside the battery compartment
of your SPOT Gen3. You will need these codes when
setting up your account on FindMeSPOT.com/Activate.
ELECTRONIC SERIAL
NUMBER (ESN)
AUTHORIZATION CODE
ESN: 0-0000000
Auth: 00000000
5