Vnm ® 4 Signmaker Quickstart - Cobra VnM SignMaker User Manual

1
PRINTER MUST BE TURNED OFF!
Open printer lid by pressing
the green tabs on each side
located toward the front
of the printer.
3
Easily slide new VnM Media
into roll mount.
5
Plug VnM4 Keypad & the power
cord into AC power cord socket at
the rear of the VnM4 Printer.
3
®
VnM 4 SignMaker Quickstart
2
Slide ink roll onto first spindle and
set in rear hub. Pass ink roll leader
under the ink roll carriage, past the
printhead, and attach to the ink
roll take up core in front hub.
4
Feed media face up under the support
bar and through the cutter slot.
6
Plug power cord into a properly
grounded power outlet. Turn on VnM4
Printer, choose template and print.