Table of Contents
Advertisement
3)
Hot spring area where corrosive gases exist, e.g., sulfide gas.
4)
Factories where the power voltage fluctuates seriously.
5)
Inside a car or cabin.
6)
Place like kitchen where oil permeates.
7)
Place where strong electromagnetic waves exist.
8)
Place where flammable gases or materials exist.
9)
Place where acid or alkali gases evaporate.
10) Other special environments.
Precautions before installation
1)
Decide the correct way of conveying the equipment.
2)
Try to transport this equipment with the original package.
3)
If the unit has to be installed on a metal part of the building, electric insulation must be installed, and the
installation must meet the relevant technical standards for electric devices.
Installation space
Before installing the unit, reserve the space of maintenance .
WARNING
Ask your supplier to install the air source heat pump water heating units. Incomplete installation
performed by yourself may result in a water leakage, electric shock, or fire.
The place without direct sunlight and other heat supplies. If there's no way to avoid these, please install
a covering.
The unit must be securely fixed, or else, noise and shaking will be resulted.
Make sure that there's no remora around the unit.
In the place where there is strong wind like seashore, fix the unit in the location protected from the wind.
Carry the unit onto the site
1)
In order to avoid scratch or deformation of the unit surface, apply guard boards to the contacting
surface.
2)
No contact of fingers and other things with the vanes.
3)
Don't incline the unit more than 45° in moving, and keep it vertical when installing.
Install the unit.
1)
The circulating air for every unit should be more than 700m3/h.
2)
Make sure there is enough Installation space.
3)
Outline dimensional drawing
Sanitary Water Heater Technical Manual
Advertisement
Table of Contents
