Test Procedure - LG MS1949G Service Manual

COMPONENTS
HIGH VOLTAGE
CAPACITOR
HIGH VOLTAGE
DIODE
NOTE :
Some inexpensive meters
may indicate infinite
resistance in both direction.
LGE Internal Use Only

TEST PROCEDURE

NOTE: When testing the magnetron, be sure to install the magnetron gasket
in the correct position and be sure that the gasket is in good condition.
Measure the resistance.
(Ohm-meter scale: Rx1000)
• Terminal to terminal.
Measure the resistance.
(Ohm-meter scale: Rx1000)
• Terminal to case.
Measure the continuity (Forward).
(Ohm-meter scale: Rx10000)
Measure the continuity (Reverse).
(Ohm-meter scale: Rx10000)
5-9
Antenna
Gasket
Chassis
Filament
Normal: Momentarily indicates
Normal: ∞
Normal: ∞
Abnormal: Continuity.
Normal: Continuity.
Abnormal: ∞
Copyright © 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
RESULTS
several ohms, and then
gradually returns to
infinite.