How To Use - LG HBS-700 User Manual

How to use

Controls
Power on / Power off
- Move the power switch to the 'ON' or 'OFF' side.
Volume Control
- Briefly press the VOLUME button.
Charging
- When the charger is connected, with the power on or off, the headset will turn off.
- While charging, the LED indicator will show a solid red light.
- When charging is complete, the LED indicator will turn off.
Battery status check
- Press and hold the VOLUME DOWN button for 3 seconds.
- There are 3 levels of battery status
Battery status High
LED display Solid blue for 1 second Solid violet for 1 second Solid red for 1 second
Low battery
- An announcement will be made once every 30 seconds.
- If the battery is not charged, the headset will turn off.
Answering a call / Ending a call
- Briefly press the CALL button.
Last number redial*
- Press and hold the CALL button for 1 second to activate "Last Number Redial".
The headset will beep, and call the last number dialed.
Making a call
- If you make a call from the handset, the call will (subject to phone settings) automatically
transfer to the headset. If the call is not automatically transferred, you can manually
transfer the call by press and hold VOLUME UP button for 3 seconds.
Voice dialing*
- Briefly press the CALL button to activate "Voice Command".
Note: If the handset does not support Voice Dialing, it is possible that performing this action
will activate Last Number Redial.
Transferring a call*
- While on a call on your handset, press and hold VOLUME UP button for 3 seconds to
transfer the audio either from headset to handset or from handset to headset.
Call waiting*
- Answer a second call without hanging up the first call by pressing the CALL button for 1
second (you will hear a beep). Press the CALL button for 1 second to turn to the
original call.
- Briefly press the CALL button to terminate the active call or both calls at once. (subject
to handset's support)
4
Medium Low
Call Reject*
- Press the CALL button for 1 second when the handset rings.
Out of range
- Operating range up to 10 meters (approximately 33 ft)
- If the headset and handset do not automatically reconnect when they are back within
the required range, briefly press the CALL button on the HBS-700 to reconnect
manually.
* It is possible to use these functions only when your handset supports them. For further
information about using these features, please consult your handset's user manual.
Audio streaming
- PLAY : Briefly press the PLAY/PAUSE Button.
- PAUSE : Briefly press the PLAY/PAUSE button.
- STOP : Press and hold the PLAY/PAUSE button.
- NEXT SONG : Briefly press the FF button.
- PREVIOUS SONG : Briefly press the REW button.
- FAST FORWARD : Press and hold the FF button.
- REWIND : Press and hold the REW button.
- Music Enhancement (Equalizer) : Press and hold VOLUME UP and VOLUME DOWN
buttons simultaneously for 1 second to switch between EQ's (Normal or Bass).
Multi-connection
- In Multi-Connection mode, your handset can only be used to make/receive calls, not to
listen to music.
- To enter Multi-Connection mode:
1. Connect your HBS-700 to a handset.
2. Power off the HBS-700
3. Place your HBS-700 into pairing mode and pair/connect to a Bluetooth Stereo enabled
audio device (not your handset). (This Bluetooth Stereo enabled audio device must
only support the A2DP/AVRCP profiles, not the headset/hands-free profiles)
4. Once the Bluetooth Stereo enabled device is paired and connected, press the CALL
button once briefly on the HBS-700 to reconnect with the handset (only the
headset/handsfree profile will connect).
5. The handset is now paired with the headset/hands-free profile of the HBS-700. The
Bluetooth Stereo enabled audio device is paired with A2DP/AVRCP stereo profiles.
* Note: In order to access Multi-Connection mode, at least one of the two devices you are
trying to connect to the HBS-700 must be able to select a profile, OR one of the two
devices must only support one profile (Either Headset/Hands-free or A2DP/AVRCP).
For example: Two handsets which support both the Headset/Hands-free and
A2DP/AVRCP profiles cannot be connected to the HBS-700 simultaneously. But, one
handset supporting Headset/Hands-free/A2DP/AVRCP and a Bluetooth Stereo Dongle
supporting only A2DP/AVRCP is OK.
How to use
5