Toshiba MV20P2C Service Manual page 11

1-5: DECK CHASSIS (Refer to Fig. 1-5)
NOTE
Do not remove the cable at the FE Head section. The FE
Head may be damaged if you remove the cable by force.
Remove the screw 1.
1.
2. Remove the FE Head.
Remove the 3 screws 2.
3.
4. Disconnect the following connectors:
(CP1001, CP4001 and CP4002).
5. Remove the Deck Chassis in the direction of arrow.
FE Head
Deck Chassis
Syscon PCB
1-6: SYSCON PCB (Refer to Fig. 1-6)
Remove the screw 1.
1.
2. Remove the Syscon PCB in the direction of arrow.
Syscon PCB
1
DISASSEMBLY INSTRUCTIONS
2
1
2
2
Fig. 1-5
Deck Holder
Fig. 1-6
B1-2